跳转到主内容

修复你的物品

维修的权力

商店

The Canon PowerShot A2000 IS is a 10-megapixel point-and-shoot camera with a 6x optical image-stabilized zoom lens. It was originally released in 2009.

7 个问题 查看全部

Why do my batteries only last a few seconds?

This camera has worked fine for a few years, but recently the batteries have been dying very quickly - the low battery sign flashes, then the screen goes blank and when I turn the camera on again, either the screen says "change batteries" or turns off in about a second. When I get lucky, the camera will stay on just long enough for me to snap a picture. After changing the batteries, they usually don't last more than a minute. I've tried the toothpick trick with folded pieces of plastic straws but it doesn't help.

I may have dropped the camera or dropped something on it, because there is a small crack on the top corner, next to the shoot button. Could that have caused this problem? Any suggestions are much appreciated.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1

评论:

Brand new batteries last only a minute? Have you tried different ones?

完成的

添加一条评论

2个回答

已选择的解决方案

There might be a short circuit inside the camera that shorts the battery leads - perhaps intermittently - so they discharge quickly. Or the voltage regulator may be broken (if those exist in cameras, I'm not sure).

Third option is the batteries are old, have been subjected to heat etc. I would try another battery to be sure. Old or overheated batteries tend to last shorter.

这个答案有帮助吗?

得分 0
添加一条评论

Have a look atthe "low battery" or "no start-up" guide I have published, it may be the answer to your problem.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

mugsey 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 9

总计 2,209