Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

174 个问题 查看全部

Adhesive strip on the lcd screen replacement?

I replaced the digitizer and in the process the strip on the lcd (it's thicker and seems like it is foam) has been roughed up.... Is there any replacement products I can use? I don't see anything about this anywhere...Also While I have you.... Some areas of the new digitizer act erratic. Where could the issue be?

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0

评论:

Where did you buy it? Don't buy Amazon...

添加一条评论
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3个回答

已选择的解决方案

This is the foam gasket. It is almost impossible to buy the correct one because nobody seems to care about quality repairs.

这个答案有帮助吗?

按维修分数 2

评论:

There are quality digitizers with quality adhesive from suppliers like iFixit or Mobile Defenders... Hint sellers online like Amazon is not a good choice, unless you have proven that the seller has quality parts. The black adhesive is best and the clear is "cheap jelly" to say the least! I have perfect seals with the black and constantly coming unsealed with the clear mess... Hope this helps.

添加一条评论

if the screen is "ghost touching" Meaning just randomly touching places and acting wierd. 1 of 2 problems.

1. Bad connection

Clean ribbon cable with alcohol.

Reconnect digitizer flex. Reset the device

2. If that doesn't fix it than more than likely you have bad part.

这个答案有帮助吗?

按维修分数 0

评论:

I actually discovered that the ghost touching is because of an ESD happening between the digitizer and the chassis. Kapton tape along the bottom of the lcd does the trick

hi sean,

the foam gasket u can buy on etradesupply.

i can not give u a link, cause the system will mark it at spam- this already happened.

etradesupply has a warehouse in the US.

i am in switzerland and order from the warehouse in china.

it's the best foam gasket i ever saw, cause it's comeing on a template.

just place the template over the lcd and push a little bit the foam and take it off and thats it.

添加一条评论

There are quality digitizers with quality adhesive from suppliers like iFixit or Mobile Defenders... Hint sellers online like Amazon is not a good choice, unless you have proven that the seller has quality parts. The black adhesive is best and the clear is "cheap jelly" to say the least! I have perfect seals with the black and constantly coming unsealed with the clear mess... Hope this helps.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

Sean Smith 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 7

总计 721