LCD flickering after digitizer replacement. Tried new LCD, still same.

Question

iPad Mini Wi-Fi

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 个问题查看全部

Robert @robert78277

声誉积分: 1

1

发帖于: 2014年1月4日

更多选项

LCD flickering after digitizer replacement. Tried new LCD, still same.

The LCD had no issues when the customer brought in the ipad mini. When I replaced the digitizer, the lcd was all greyed out and 2 black lines running down the middle. I assumed it was a bad LCD so I tried a new one and the same problem persists. Could this be a board issue? If so, is there a fix?

Tried hard reset, same issue.

Original LCD http://imgur.com/tonBntl

New LCD http://imgur.com/NZk3zeS (red is to protect customors identity, not on actual lcd)

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

2个答案

Ashley Ryan @ashleyryan 声誉积分: 5.5千 20 17 12 · Answer 1 · 2014-01-04T15:45:13-07:00

Ashley Ryan @ashleyryan

声誉积分: 5.5千

20

17

12

发帖于: 2014年1月4日

更多选项

This is probably a logic board issue. What most likely happened is that a connector was damaged. You may need to replace it.

这个答案有帮助吗？

是否

得分 0

1条评论:

Thanks, that's what we thought. We'll try apple and see what they have to say.

由 Robert 完成的 2014年1月4日

添加一条评论

ecabassa @ecabassa 声誉积分: 83 3 3 · Answer 2 · 2015-02-04T07:54:32-07:00

ecabassa @ecabassa

声誉积分: 83

3

发帖于: 2015年2月4日

更多选项

Were you able to fix your problem? I am confronting the same issue. The screen is flickering(the image jump and jump all over the screen) Both LCD I have tested so far are broken inside, so I don't know if this flickering is caused by the broken LCD or by the connector.

Let me know, thanks!

这个答案有帮助吗？

是否

得分 0

添加一条评论

iPad Mini Wi-Fi

LCD flickering after digitizer replacement. Tried new LCD, still same.

2个答案

添加你的答案