修复你的物品 社区 商店

维修SLR,DSLR以及无反光镜可互换镜头以及拆解指南

48 个问题 查看全部

更多选项

calibrating the aperture assembly on a canon 24-105 F4L

i replaced the aperture flex cable of my canon 24-105 which was badly torn and causes err01 when i try to use my lens. but i was not able to make a careful mark on the 3 eccentric setscrews that is used for the alignment of the 3rd group optics in the aperture assembly. now i am able to use my lens but all images captured are not that sharp as before and compared to my other lenses i can really say that my 24-105 is bad and out of calibration. i need a guide to calibrate the 3 eccentric setscrews... i found some guide somewhere but it is not clear how.. i need in layman's term if possible with illustrations

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 -1
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

There is two ways you can do this:

The first is using a collimator which is an artificial image set to infinity this is how the pros adjust lenses in the shop. Edmund Optics Vid on collimation

The other is on a clear night with a visible moon use it as your target. Adjust the lens so it is set for the most zoomed in and set manually for infinity. Adjust the lens group so the image is sharp that should do it.

Here's one other method using a second camera Using a second SLR camera as a collimator

这个答案有帮助吗？

是 否
得分 5

3条评论:

wow, thanks alot Tom Chai.. i will try this one... i will look for other slr camera to be used as collimator

由完成的

FYI - It was Dan not Tom that offered you that answer ;-}

由完成的

This is real hardcore stuff. I never tried to repair optical equipment. I usually just replace the entire module

由完成的

添加一条评论

更多选项

You'll need professional equipment. There is a reason why the lens are so expensive

这个答案有帮助吗？

是 否
得分 1
添加一条评论

添加你的答案

ray floyd 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 4,243