Why my IPAD 2 LCD not Lit After Reconnect after screen replacement?

Question

iPad 2 GSM

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 个问题查看全部

问题已关闭

fairuz zamir @fairuzzamir

声誉积分: 1

发帖于: 2013年10月15日

更多选项

Why my IPAD 2 LCD not Lit After Reconnect after screen replacement?

Hello iFixit i've replace my ipad 2 screen..the problem is i remove the LCD connector as i've seen in the DIY Phone Doctors video. When I Reconnect, the LCD screen wont lit. FYI while i'm working to remove the front screen i was inadvertently touch the power button, thus the ipad was in ON state. due to my screen cracked so much so i didnt turn off back the power button..assuming the touch screen not working after it cracked so much on the whole screen..and just simply assumed no shortage will happen if i'm not switch off the ipad. Now the LCD doesn't lit up..and the power button also malfunction..i do not know why..kindly help me solve this problem and help my DIY..

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

Yareck @yareck 声誉积分: 55 3 · Answer 1 · 2013-10-21T14:38:17-07:00

Yareck @yareck

声誉积分: 55

3

发帖于: 2013年10月21日

更多选项

Try to soft reset. Press and hold power button ang home button for 10 sec

这个答案有帮助吗？

是否

得分 0

1条评论:

Thanks Yareck for the info..by the way this is the update of my ipad 2..once i drained my battery..i reconnnect the LCD connector and then i recharged..coincidentally after 5-10 seconds the backlight was on aain where i can see the APPLE logo as we switch the ipad on..i fully charged it and checked my on/off button all function volume n camera all ok..except there was one WIFI FLEX i had accidentally cut it when i was prying at the lower right section..but the wifi still ok only requires close wifi sources..

由 fairuz zamir 完成的 2013年10月21日

添加一条评论