Why wiill it not boot after new digitizer fitted?
I have just replaced a digitizer front screen on a friends iPad 4.
It was working fine before I did this, the screen was just cracked.
Now I get [NAND] find flash media and keepout 601 physical block off set .... there are about 5 to 6 lines all starting with NAND, The Apple logo is in the centre of the screen.
The only way I can turn the machine off is holding down the home button and sleep bottom together.
Help! Many thanks Dan
1条评论
check my answer below
由 MASTA KAHUNA 完成的