跳转到主内容

Model A1225 / Early 2009 / 2.66, 2.93, or 3.06 GHz Core 2 Duo processor

175 个问题 查看全部

NVIDIA GeForce GT130 1GB MXM replacement

Hi I have an iMac 24 inch A1225 early 2009 model with 3.0ghz processor and a faulty NVIDIA GeForce GT130 512MB MXM graphics card. I though of replacing the graphics card and upgrading it to a 1GB instead and found out cheaper replacement for Acer Laptops. Just wondering if anyone have tried this or whether this is going to work?

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 1
添加一条评论

Macbook 电池维修套装

起价 $69.99

Buy Now

Macbook 电池维修套装

起价 $69.99

Buy Now

4个回答

已选择的解决方案

You can only use a VGU that Apple installed on this logic board. You will have EFI, and OS (driver) problems if you don't.

If this Answer is helpful please remember to return and mark it Accepted.

这个答案有帮助吗?

按维修分数 1

评论:

Hi mac, does this mean that even it is the same VGU / GPU and card type, it will not work as they have different firmware? and will cause EFI/driver problems? My iMac original card is NVIDIA GeForce GT130 512MB, and the one I found for Acer laptop is the same but with higher memory NVIDIA GeForce GT130 1GB.

添加一条评论

Hey guys, i replace the card with a Dell G92-751-B1 M17X/M15X Nvidia GTX 260M 1GB MXM 3.0 and it works fine but gamma is too high (it is like take a look to the sun without sunglasses). I tried to low it with same programs but I cannot lower to to an acceptable level (fn f1 and fn f2 keys dont work). I install windows 7 on bootcamp and cannot install any nvidia drivers, always computer tell me that cannot install the specific driver. In mac the System Information card model correctly listed (gtx 260m). Any idea?

这个答案有帮助吗?

按维修分数 1

评论:

The issue you are facing is the cards firmware. You'll need to update it with the correct version for your system.

Any quick guide or any web to update the firmware?

Not much in the Mac space. Most people clone a good image from a working card (one for a Mac). In the Windows world you can use NVIDEA's tools.

添加一条评论

you will need to chech rom to see if it has enough room for the apple EFi in order to run in osx, you can run it in PC mode as long as you set it up before you insert the card, switch on straight to PC rather than boting into OSX

这个答案有帮助吗?

按维修分数 0
添加一条评论

Is there any other graphics card from ATI or nVidia not so many problems ?

这个答案有帮助吗?

按维修分数 0

评论:

Sadly, you're stuck to what Apple has used in their systems as you also need the device driver in the OS.

添加一条评论

添加你的答案

jobnathan 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 12

总计 2,295