修复你的物品 社区 商店

745 个问题 查看全部

更多选项

Mother Board : S.O.S.

I tried an impossible repair for a customer

MacBook Pro Mid 2009

After updating interrupted, does not start. The motherboard is SOS: 3 long beeps, 3 short and 3 long

I tried everything I believe:

Reinstalling Firmware 1.7 for this model, the CD is rejected (I burned CD 3: the same)

Replacing RAM: Nothing

Replaced the battery, disconnected the battery ...

Unable to start external hard disk or DVD with install., The keyboard is not functional.

If someone in another track, I'm interested, but obviously replace the motherboard!

Firmware Pb, pb Burning CDs or DVDs

Big thank you in advance

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 -1
2条评论

What was being updated here: the firmware, OS or hardware?

由完成的

Mac Os update only

由完成的

添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

From what I understand the logic board may be pooched. I know of no way to DIY correct this... a logic board repair business might be able to replace/re-flash the firmware chip... but the shade tree fix (if the reload failed) would be to replace the logic board.

If this Answer is helpful please remember to return and mark it Accepted.

这个答案有帮助吗？

是 否
得分 2

2条评论:

I think unfortunately you're right :(

由完成的

Firmware/EFI chip changed and it works fine, Thanks

由完成的

添加一条评论

更多选项

I don't remember seeing the OS installer do a firmware upgrade in the update process. So I'm not sure why your system bit the big one here when you were only upgrading the OS. What OS-X are you installing?

Review this Apple TN on the Beep Codes iMac (Mid 2007) and later models: About startup tones By this your Firmware is in the process of being updated. So it is likely looking for the image file on the HD or DVD you where installing the OS from. Put everything back together and as you were doing the upgrade and see if you can get the process to complete.

这个答案有帮助吗？

是 否
得分 0

2条评论:

Yea sometimes the firmware seems to take unusually long, and, you must let it restart (possibly more than once) on its own until it stops at the login/desktop (however you have it set up).

由完成的

Mikhrych - Can you give us details on what did it. Did you just let the process complete or did you have to physically swap out the EEPROM after loading it with the firmware.

由完成的

添加一条评论

添加你的答案

Mikhrych 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 735