修复你的物品 社区 商店

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 个问题 查看全部

更多选项

I replaced Airport card, but now my battery won't charge.

I succesfully replaced my BCM94321MC airport card with a 94322 card. It works great, reception is better, etc!

However, I just noticed that my macbook won't charge anymore. It says that it's currently has 0 charge, and that charging will take 20 hours.

When I pulled the powerchord, it immediately turned off. (after 15+ minutes of charging).

I had used my macbook yesterday until the battery was empty, so I used the powercord today. However, normally it doesn't shutdown immediately after a bit of charging.

I normally can use it for at least 2 hours on battery and coconutBattery says the current capacity is 4000mAh and Design capacity is 5020mAh

Magsafe connector light is orange, so it's charging. Without battery it stays green and the system then doesn't detect a battery at all, while now it does.

Is it possible something went wrong with the reassembly?

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 -1
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Hmm, somehow it now started charging again... I feel a bit stupid. :)

I guess everything is ok.

这个答案有帮助吗？

是 否
得分 0

1条评论:

I did reset SMC, maybe that did help, but it's unclear.

由完成的

添加一条评论

更多选项

My first step would be to tear down and check all connections/ribbons etc. unplug and reseat all connections, if there are ribbons involved ensure all are all the way in to the sockets (up to the white line), and re-assemble and test. Something else that has happenned in the past, is one of the cables were 'pinched' between chassis parts on re-assembly, causing a weak connection to the component, so make sure all cabling is in it's proper pathway.

Xpider

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Peterdk 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 13

总计 130