修复你的物品 社区 商店

iPhone4S是第五代iPhone。网络制式为GSM/CDMA ，存储容量有8GB、16GB、32GB、64GB可选，机身颜色有黑色、白色可选。维修iPhone4S是容易的，需要耐心，用到的工具有螺丝刀、撬棒等。

2193 个问题 查看全部

更多选项

Power button flex assembly to replace

Power button on my iphone 4s is stuck. I read the guide on ifixit but I'd like to have some advises or opinion on repairing.

Honestly, how is it difficult to replace it? I should decide whether buying repair tools and flex assembly or sending to the assistance.

I know that it is hard to quantify the difficulty level, but I'd like to kwow if it easy to fall into error.

I'm not an electronic expert, but sometimes I get pleasure from repairing items. For example, I replaced battery on my old iPhone 3G without big problems.

Thanks

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 -1
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

go for it, you have to take the entire phone apart but you are at the right place if you have some questions

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

Don't replace the flex. Just replace the yellow tape with the black dot on it. The dot is missing on your yellow tape (the button just doesn't reach therefore it doesn't click). Sometimes if you look carefully you can find it in the casing near the power button and just super glue it back on. If you replace the flex 8 times /10 you will have proximity sensor issues.

这个答案有帮助吗？

是 否
得分 0

3条评论:

Ok, so if I didn't find the dot in the casing, I have to buy a new flex and replace only the yellow tape with the black dot?

由完成的

do not just replace the yellow tape. that's just a temporary fix and will come loose again. and you will have 0 out of 10 problems with the proximity sensor because its an iphone 4s. iphone 4 is a different story. have a nice repair

由完成的

I don't know what you're talking about being a temp fix. I do these for a living and to this day I haven't had a single warranty.

If you can find the dot then you don't need parts and can just glue it on top of the yellow tape. If you can't find it then you may need to order the piece in which case you can just swap it over.

The trick to swapping it without touching the tape with your fingers or multiple surfaces or else the tape looses its stickiness. There's 2 metal layers under the tape so those have to fit in properly into the plastic where the yellow tape sticks onto. Email me if you need more assistance. Info@yolorepair.ca

由完成的

添加一条评论

添加你的答案

Pierluigi 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 844