Hold switch doesn't works

Question

第四代iPod/iPod Photo

型号 A1059 或 A1099 / 20, 40, 或 60 GB 硬盘 / 中央转盘为触控激活

227 个问题查看全部

rogerangela @rogerangela

声誉积分: 11

1

发帖于: 2010年3月25日

更多选项

Hold switch doesn't works

Since I replaced the broken hard disk, my iPod is locked and shows the padlock icon on the screen. It works connected on the computer and the car adapter, but obviously the clik wheel doesn't responds. I've tried all the common recomendations -reboot, restore, upgrade firmware- and nothing happens.

I replaced the headphone jack cable -which had broken when changed the disk- and today I tried to fix it changing the headphone jack and headphone jack bracket. Same results.

I have a new iPod Touch but I want to preserve the old one because I usually use in the car. I can hear my music, but imagine the situation: only one option, reproduce the songs in alphabetically, from a to z!

Can someone help me?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

Thanks Wes for your answer, but I think that's not my situation. I put again the headphone cable and nothing happens.

But I observed something courious: the central button turns on the iPod also with the hold switch in the locked position. But still locked with the padlock on the screen...

由 rogerangela 完成的 2010年4月9日

添加一条评论

1个答案

已选择的解决方案

Wes @wes6099

声誉积分: 43

3

1

发帖于: 2010年3月28日

更多选项

Hi, I had a situation similar to yours. I purchased an 4th generation photo iPod from an individual that was "stuck" in the

lock position on the LED screen. I openned it up and found that the headphone cable has been put back up-side down,(not backwards).

I flipped in over and the lock worked perfectly. I don't know

if this is your situation but it worked for me. Good Luck.

这个答案有帮助吗？

是否

得分 1

1条评论:

Perfect. My headphone plug was just loose after I put a new battery in. I took the case off, re-plugged it in and the "lock" icon went away. Works perfect now. Thank you!

由 Tia Rupe 完成的 2017年11月24日

添加一条评论

Thanks Wes for your answer, but I think that's not my situation. I put again the headphone cable and nothing happens.

But I observed something courious: the central button turns on the iPod also with the hold switch in the locked position. But still locked with the padlock on the screen... — rogerangela
Perfect. My headphone plug was just loose after I put a new battery in. I took the case off, re-plugged it in and the "lock" icon went away. Works perfect now. Thank you! — Tia Rupe

第四代iPod/iPod Photo

Hold switch doesn't works

1个答案

添加你的答案