跳转到主内容
帮助

当前版本: Cam Bennett ,

标题:

MacBook Retina Pro 2013 - Broken Right Fan ZIF socket

文本:

I recently spilled beer on my laptop (Early 2013 15' Macbook Pro Retina), resulting in some corrosion on the connection between the logic board and the top case/keyboard. I soaked it in iso alcohol and removed the corrosion with a fine brush. After putting it together, it works fine (as far as I can tell)!
 
Unfortunately, when re-assembling the laptop, I broke the retaining flap on the right fan ZIF socket. For reference, it's the socket shown here:
 
https://d3nevzfk7ii3be.cloudfront.net/igi/bkEHBThUxblPR6pX.huge
 
The socket is still intact, and the cable fits in it, but I think without the plastic latch/flap the cable won't engage. I put some electrical tape under the cable to hold it parallel but that doesn't help it engage with the socket.
The socket is still intact, and the cable fits in it, but I think without the plastic latch/flap the cable won't engage. I put some electrical tape under the cable to hold it parallel but that doesn't help it engage with the socket.
 
I ran the apple hardware diagnostic tool (startup while holding the 'D' key) and it gave me this error - 4MOT/4/40000002 - Right-Side-0. It seems like the laptop can't recognize the right fan without the socket being locked down.
 
Is there any way to fix just the flap? Or the ZIF socket? I have some experience doing SMD soldering so it's not out of the realm of possibility to replace the socket itself if I can find the part.

设备:

MacBook Pro 15" Retina Display Early 2013

状态:

open

已接受的回答:

250109

编辑: Cam Bennett ,

标题:

MacBook Retina Pro 2013 - Broken Right Fan ZIF socket

文本:

I recently spilled beer on my laptop (Early 2013 15' Macbook Pro Retina), resulting in some corrosion on the connection between the logic board and the top case/keyboard. I soaked it in iso alcohol and removed the corrosion with a fine brush. After putting it together, it works fine (as far as I can tell)!
 
Unfortunately, when re-assembling the laptop, I broke the retaining flap on the right fan ZIF socket. For reference, it's the socket shown here:
 
https://d3nevzfk7ii3be.cloudfront.net/igi/bkEHBThUxblPR6pX.huge
 
The socket is still intact, and the cable fits in it, but I think without the plastic latch/flap the cable won't engage. I put some electrical tape under the cable to hold it parallel but that doesn't help it engage with the socket.

I
ran the apple hardware diagnostic tool (startup while holding the 'D' key) and it gave me this error - 4MOT/4/40000002 - Right-Side-0. It seems like the laptop can't recognize the right fan without the socket being locked down.
The socket is still intact, and the cable fits in it, but I think without the plastic latch/flap the cable won't engage. I put some electrical tape under the cable to hold it parallel but that doesn't help it engage with the socket.

I
ran the apple hardware diagnostic tool (startup while holding the 'D' key) and it gave me this error - 4MOT/4/40000002 - Right-Side-0. It seems like the laptop can't recognize the right fan without the socket being locked down.
 
Is there any way to fix just the flap? Or the ZIF socket? I have some experience doing SMD soldering so it's not out of the realm of possibility to replace the socket itself if I can find the part.

设备:

MacBook Pro 15" Retina Display Early 2013

状态:

open

编辑: Cam Bennett ,

标题:

BrokenMacBook Retina Pro 2013 - Broken Right Fan ZIF socket
BrokenMacBook Retina Pro 2013 - Broken Right Fan ZIF socket

文本:

I recently spilled beer on my laptop (Early 2013 15' Macbook Pro Retina), resulting in some corrosion on the connection between the logic board and the top case/keyboard. I soaked it in iso alcohol and removed the corrosion with a fine brush. After putting it together, it works fine (as far as I can tell)!

Unfortunately, when re-assembling the laptop, I broke the retaining flap on the right fan ZIF socket. For reference, it's the socket shown here:

https://d3nevzfk7ii3be.cloudfront.net/igi/bkEHBThUxblPR6pX.huge

The socket is still intact, and the cable fits in it, but I think without the plastic latch/flap the cable won't engage. I ran the apple hardware diagnostic tool (startup while holding the 'D' key) and it gave me this error  - 4MOT/4/40000002 - Right-Side-0. It seems like the laptop can't recognize the right fan without the socket being locked down.

Is there any way to fix just the flap? Or the ZIF socket? I have some experience doing SMD soldering so it's not out of the realm of possibility to replace the socket itself if I can find the part.

设备:

MacBook Pro 15" Retina Display Early 2013

状态:

open

原帖由: Cam Bennett ,

标题:

Broken Right Fan ZIF socket

文本:

I recently spilled beer on my laptop (Early 2013 15' Macbook Pro Retina), resulting in some corrosion on the connection between the logic board and the top case/keyboard. I soaked it in iso alcohol and removed the corrosion with a fine brush. After putting it together, it works fine (as far as I can tell)!

Unfortunately, when re-assembling the laptop, I broke the retaining flap on the right fan ZIF socket. For reference, it's the socket shown here:

https://d3nevzfk7ii3be.cloudfront.net/igi/bkEHBThUxblPR6pX.huge

The socket is still intact, and the cable fits in it, but I think without the plastic latch/flap the cable won't engage. I ran the apple hardware diagnostic tool (startup while holding the 'D' key) and it gave me this error  - 4MOT/4/40000002 - Right-Side-0. It seems like the laptop can't recognize the right fan without the socket being locked down.

Is there any way to fix just the flap? Or the ZIF socket? I have some experience doing SMD soldering so it's not out of the realm of possibility to replace the socket itself if I can find the part.

设备:

MacBook Pro 15" Retina Display Early 2013

状态:

open