配件 & 工具
== Button Won't Press Down == ''The large gray button that turns the blade refuses to press down.'' === Lid is Not Secure === The lid of the mini chopper must be locked into place before the button may be pressed. Before assembly, make sure all parts are very clean. First, make sure the main container is securely fastened. To do so, align the two bumps on the clear container with the grooves on the black body. Twist clockwise until the container locks in place. The blade must also be in place in order for the lid to fit on the container. Using caution, place the blade over the middle pillar. Push gently while twisting slowly until the blade slides down in place. Place the lid on the top of the container so that its white dot is pointing away from you and the white dot on the black body is pointing to your right. While pressing down gently, turn the lid clockwise until both dots are aligned and the lid locks in place. If the lid refuses to lock completely, the locking switch may be jammed. Make sure there is no debris blocking its movement. If the switch is clear and the lid still refuses to lock, try replacing the switch. === Lid is Broken === If lid is missing its side tabs, it is broken and needs to be replaced. == Pressing the Button Yields No Result == ''The button can be pressed, but there is no response from the blade.'' === Chopper is Unplugged === The mini chopper must be powered in order to function. Make sure the power cable is plugged into a socket. === Components are Broken === There are many other components that are necessary for the chopper to function. Refer to the [[Topic:Rival_Mini_Chopper_MC-67BL|Rival Mini Chopper Page]] for replacement guides. == Blade Has Stopped Spinning == ''The blade has stopped spinning mid-use for an unknown reason.'' === Blade is Jammed === The blade may be jammed by food. Note that the maximum capacity of the blender is 1 1/2 cups. If there is more than this amount of food in the blender, remove it before attempting to un-jam the blender. Make sure the chopper is unplugged. With caution, remove any large pieces of food that may be stopping the blade from spinning. Once the blade's pathway is clear, plug in the chopper again and attempt to spin the blade. === Components are Broken === A component may have broken down during the chopper's operation. Refer to the [[Topic:Rival_Mini_Chopper_MC-67BL|Rival Mini Chopper Page]] for replacement guides. == Chopper Leaks == ''The contents of the plastic container come out.'' === The lid is not properly attached to the plastic container === Before you check, unplug the device. Make sure the plastic lid of the mini chopper is locked into place. This should prevent contents of the chopper form coming out. === There are cracks in the plastic container or lid === Unplug the device and remove the contents of the container. Take out the blade and Inspect the container and the lid for cracks or holes. == Chopper stops suddenly during use == ''While using the chopper, the blades or motor suddenly stop working.'' === Chopper becomes unplugged during use === The mini chopper must be powered in order to function. Make sure the power cable is plugged into a socket. === Food is jammed between the blade === Unplug the device and remove the food obstructing the blade. Remove blade if necessary.