编辑 Razor RipStik Ripster Troubleshooting

英语

页面标题

显示标题

摘要

Here is a guide to troubleshooting problems with your Razor Ripstik Ripster.

附加信息

== ***Ripstik is moving slowly side to side*** ==

''The board is resistant to side-to-side movement.''

=== ***Torsion Bar is not clean*** ===

It’s possible that your Torsion bar is not clean. Remove the bolts on either side and separate the Ripstik into two decks. Apply grease to the torsion bar and reassemble.

=== Caster is not clean ===

It’s possible that your casters may not be clean.  Remove the wheels and then remove the bolt from the caster.

== ***Ripstick wheels are squeaky and/or slow*** ==

''The wheels are resistant to rolling movement.''

=== ***Wheel Bearings are not clean and lubricated*** ===

It’s possible that your bearings are not clean and have not been lubricated properly are on. Remove the bearings, clean the bearings out using a citrus-based cleaner, and add a few drops of skateboard lubricant to the bearings.

中文

页面标题

显示标题

摘要

附加信息

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。