编辑 JBL Charge 2 Plus Troubleshooting

英语

页面标题

显示标题

摘要

The JBL Charge 2+ made by JBL is the second generation of the JBL Charge brand.

附加信息

[flag|student_wiki]

== Speakers Are Not Providing Sound ==

'' The speakers won't play sound. ''

=== Device is off ===

Make sure the device is actually turned on. If it is off, then it cannot establish a connection with a device.

=== No battery life left ===

Sometimes, no battery can be mistaken for audio problems. If the batteries are drained, then the device wouldn't work.  Remove the drained batteries and try new ones.

=== Volume is turned off on speaker or device ===

Make sure that the volume on the speakers is turned up sufficiently enough by adjusting the volume wheel on the speaker. Then make sure that the device connected to the speaker has its volume setting at an adequate level.

=== Bluetooth connection is not established ===

Make sure that Bluetooth on the speaker is on. This is the button close to the power button. There should be a light to indicate it is working.

=== Interference ===

If the speaker is within close proximity to devices that are known to cause interference, (radios, microwaves, phones), then the speaker can give out feed back. Make sure it is a good distance away from devices that are known to cause interference.

== Bluetooth Is Not Working ==

'' Cannot establish a connection between the speaker and your other devices.  ''

=== Bluetooth is off ===

If the light on the Bluetooth button is off, press the button to turn on Bluetooth. The Bluetooth button is right beside the power button. Make sure to turn on Bluetooth on the connecting devices as well.

=== Devices are too far from each other ===

Place the speaker and the connecting device closer to each other. Bluetooth connection range can vary between different devices.

=== Low battery level ===

Make sure to charge both the speaker and the connecting device. Some of the devices may automatically turn off Bluetooth if the battery level is too low.

=== Unstable connection ===

Restart the Bluetooth on the speaker and the connecting device by turning Bluetooth off and on again. Sometime the Bluetooth connection can be very unstable for many reasons. The quickest way to solve this kind of problem is to restart Bluetooth and reestablish connections.

=== Interference ===

Move the speaker and the connecting devices away from Wi-Fi router. The Wi-Fi signal can sometimes interfere with Bluetooth.

== Speaker Won’t Turn On ==

'' The device won't turn on. ''

=== Battery is dead ===

If the speaker doesn’t have power, it will not turn on. Try plugging the device into a charger. See our [guide|53147|Battery Replacement Guide]

=== Power button will not turn on the device ===

The button itself has broke and will not make the connection to power on the device. Follow one of the button replacement [guide|53122|guide].

== Buttons Don’t Respond ==

'' The device is not responding to your input. ''

=== The battery could be dead ===

The battery could be low and that is why it will not turn on. Try plugging the device into a charger and charge it.See our[guide|53147|Battery Replacement Guide] on how to replace the battery.

=== The button module could be broken ===

The button module could be broken. To remedy this try replacing the button module. Look at the repair guides for more information on replacing parts. See our on [guide|53122|replacement guide] how to replace the buttons

== Device Unexpectedly Turns Off ==

'' The device will turn off without pressing the power button. ''

=== The battery could be low on battery ===

The battery could be low or be dead. Plugging it into the the charger will charge the battery.

=== The battery could be defective ===

The battery could be defective and no longer wants to hold a charge. Replacing the battery will fix the defective battery. Simple remove the battery panel, take out the old batteries, and put in fresh ones. See our [guide|53147|Battery Replacement Guide]

中文

页面标题

显示标题

摘要

附加信息

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。