After swapping C stick and circle pad caps, ZL button causes shutdown.After following the guide that shows how to swap the buttons, which is very misleading on the steps with connectors that...
回答“After swapping C stick and circle pad caps, ZL button causes shutdown.”Alright, not a perfect solution but way better than having to find the name of the connector and somehow replacing it. I cut extremely narrow strips of kapton tape, maybe 2mm wide at most, and layered two on top of the ribbon cable where it gets inserted into the connector. This made it thicker in this area, where the connector has been loosened from getting pulled open and somehow it works. I can boot up the console, poke the connector, press ZL and nothing disconnects anymore! Of course if someday I find the need to replace the connector properly I’ll do it, but for now this seems to work.
回答“Pressing the ZL button on device turns system off.”If you followed the guide(s) they provide here, on this website, made to be a reference on how to “properly” fix things, you have opened one or both of the connectors that are very misleadingly called ZIF connectors in the guides. They are absolutely not ZIF connectors and opening them destroys them and makes the ribbon cable unable to make good contact afterwards. Sadly the solution is to replace the broken connector(s), although I have no idea what their name is and it requires pretty precise soldering iron to do so. Update (09/17/2020): I found an alternate solution that has the potential to work if your connector is not too broken. Cut thin strips of kapton tape, 2mm wide at most, by about 10mm, and layer two or more as needed on top of the ribbon cable where it gets inserted into the connector, this will make it thicker in this area and allow better contact with the connector if it is able to still provide a minimum of closing force. Of course if your connector got lifted too much, this won’t work and...