My charge 3 recently had the same issue after some weeks of inactivity, the speakers would just shut down almost instantly without reason (full battery level indicator and it charged correctly so it didn't seem likely to be at fault here). Then I realised the battery sensor problem that appeared a few days ago on my Android phone (battery level status showing negative digits) could be causing the connected device to turn off, and so it was. Try pairing it to a different device and see if this solves, in that case I would also hard reset the speakers (press and hold volUP+play/pause until it turns off) to avoid automatic connection to the faulty device, notice that this will clear the memory of all devices paired in the past.
Secondo quanto riportato sul sito del supporto HP, sarà necessario il ripristino del BIOS per risolvere l'errore, tramite HP BIOS update o creando un’unità di ripristino su flash drive usb.
Tails is a privacy-focused GNU/Linux operating system, more specifically a Debian-based distribution. It "ships with several Internet applications, including web browser, IRC client, mail client and instant messenger, all pre-configured with security in mind and with all traffic anonymised. To achieve this, Incognito uses the Tor network to make Internet traffic very hard to trace"(source). You can either install it on your hard disk, boot it in live mode from usb/dvd(not permanent) or even create a VM (virtual machine) and try it from within your current OS. Installation how-to and downloadable images are available on the project's website
It should be possible to connect it to your MacBook and see it as an external drive if you have target mode boot option, no login required ("Target Disk Mode is useful for accessing the contents of a Mac which cannot be booted from its own operating system"). After that, you could also run Disk Utility and such to try repairing the drive
Secondo quanto riportato qui e qui(soluzione prescelta), l'I5-680 sembra essere la scelta migliore e meno rischiosa, poiché pare essere l'unico tecnicamente compatibile al di fuori dell'I3-550(serie iMac11,2; TDP 74W). Inoltre, come suggerito nel secondo link, altri aggiornamenti utili per rendere il tuo sistema più performante sono l'upgrade della RAM e l'installazione di un SSD al posto del lettore ottico e/o la sostituzione dell'HDD originale con un SSHD
This is just my 2 cents, but I would avoid messing with such a delicate component of my laptop if not strictly necessary. I would first try a software solution like OS optimization and registry tweaking followed by benchmarking (there are many utilities for that on Windows). You can also create BIOS profiles to experiment with etc. Of course removing dust/debris stuck in the air cooling system will also help. A further step could be a light/moderate undervolt+overclock, still being extremely careful and keeping in mind this procedure will definitely void your warranty, just like a fan replacement would. Obviously you'll want to monitor your laptop temperatures and go one little step at a time
Sounds more like a router configuration issue, is it working on 2.4 or 5 Ghz? You may need to tinker with operating mode, channel, or device specific restrictions to make it visible to the phone. I suggest you back up your current working settings first(from the router’s web interface), then check Can't connect to home wifi and see if it works for you
If you already tried booting in safe mode and waited for a long time for the system to load without success, then I would try verbose mode (Command ⌘+v) to have a visual input of what exactly is slowing down/blocking the boot process. Also, are there any peripherals attached to the Mac other than your mouse/keyboard? Update (01/15/2021): Ok, here's what I would do: boot into Recovery Mode by holding CMD+R on startup, release as the Apple logo appears (reference from Apple's website), wait until you get to the OSX Utilities screen (use Option+Command+R if this method doesn’t work, takes a lot more time though and requires an internet connection). Now if you have no recent Timemachine image known to work, I recommend making a backup of the corrupted disk just in case, this can be done by opening Disk utilities and following this step by step guide, remember you are gonna need a pre-formatted (one you know that works on Macs) external drive at least the same size of the one you want to backup. Finally, you...
Hi, first thing I would check is video output default settings, so if you have the monitor connected to a dedicated/discreet graphics card try connecting the video cable to the mobo integrated one or viceversa. Otherwise, the fix could be as simple as replacing the BIOS battery (if the motherboard you are using as replacement is an old one) but could also be a hardware failure/compatibility issue, or a missing power cable (do you hear any beep during power-on self-test?), knowing the PC specs would help identify the problem.
Solved it in the past, in my case issue was caused by paired device with faulty battery sensor. You could try turning off BT on every active device nearby (and check if the speaker now stays on) then on again one by one to find the culprit (similar question answered here: My JBL Charge 3 turns off by itself.)
First you should make sure you replaced "MyVolume" with the actual name of your device, if it doesn't appear on your desktop when you insert the drive you can easily get it by opening Finder and checking under "devices" in the sidebar. As Ich63 pointed out you will need to copy/paste in pieces as the terminal will not allow you edit the text that much. Alternatively, just rename it "MyVolume" as suggested by @jpdemers and copy/paste the command as is.
Asumo que estás usando Windows, sin embargo la actualización puede haber cambiado el dispositivo de vídeo predeterminado o desactivado la salida de vídeo secundaria. Si no aparece nada en la pantalla al pulsar Shift y F8 al inicio, una solución más drástica podría ser: encender el portátil, esperar 1/2 minutos y pulsar CTRL + SHIFT + WIN + B para intentar reiniciar el controlador de la tarjeta de vídeo. Si esto tampoco funciona, podrías desmontar el portátil, desconectar la pantalla de la placa base e intentarlo de nuevo.
I suggest using a slimmer version of this wrench, it fits better and reduces the risk of leaving scratches on crank arms made of delicate materials such as carbon.
Hi, first thing I would check is video output default settings, so if you have the monitor connected to a dedicated/discreet graphics card try connecting the video cable to the mobo integrated one or viceversa. Otherwise, the fix could be as simple as replacing the BIOS battery (if the motherboard you are using as replacement is an old one) but could also be a hardware failure/compatibility issue, or a missing power cable (do you hear any beep during power-on self-test?), knowing the PC specs would help identify the problem.
Solved it in the past, in my case issue was caused by paired device with faulty battery sensor. You could try turning off BT on every active device nearby (and check if the speaker now stays on) then on again one by one to find the culprit (similar question answered here: My JBL Charge 3 turns off by itself.)
First you should make sure you replaced "MyVolume" with the actual name of your device, if it doesn't appear on your desktop when you insert the drive you can easily get it by opening Finder and checking under "devices" in the sidebar. As Ich63 pointed out you will need to copy/paste in pieces as the terminal will not allow you edit the text that much. Alternatively, just rename it "MyVolume" as suggested by @jpdemers and copy/paste the command as is.
Grazie Mattia, qualora volessi contribuire sentiti pure libero di apportare miglioramenti al testo
Hola, qué modelo? Tienes raton usb y adaptador OTG a mano?
@Mattias Lindström partition table must be set to GPT, otherwise MBR/APM formatted devices’ size is limited to 2TB
Asumo que estás usando Windows, sin embargo la actualización puede haber cambiado el dispositivo de vídeo predeterminado o desactivado la salida de vídeo secundaria. Si no aparece nada en la pantalla al pulsar Shift y F8 al inicio, una solución más drástica podría ser: encender el portátil, esperar 1/2 minutos y pulsar CTRL + SHIFT + WIN + B para intentar reiniciar el controlador de la tarjeta de vídeo. Si esto tampoco funciona, podrías desmontar el portátil, desconectar la pantalla de la placa base e intentarlo de nuevo.
I suggest using a slimmer version of this wrench, it fits better and reduces the risk of leaving scratches on crank arms made of delicate materials such as carbon.
Hi, did you enable Developer Options from the Settings menu?