Hello, maybe you can try the following methods to fix your Micro SD card not reading error: 1. Clean SD Card and reader Clogged SD card and reader due to dirt and dust might be the reason of poor connection resulting in SD card cannot be detected. In cleaning your SD Card, lightly wipe the dirt off with a cotton cloth dipped in little alcohol or water. Update card reader driver This can be done either manually or automatically. For manual driver update, just proceed to the manufacturer’s website and search for the recent correct driver. Try searching both in the PC’s manufacturer and card reader manufacturer. You may also do the steps below: (1) Insert SD Card into your PC’s card reader. (2) Go to Navigate Control Panel – System – Device Manager– Disk drivers (3) Right-click your USB device and select Uninstall and choose Scan for hardware changes to refresh the drivers.
Try updating the Motherboard’s Chipset Driver Step 1: Go to the Motherboard’s manufacturer website and find the latest Chipset Driver and then download it, follow the tutorial to update the driver. If you don’t know which manufacturer is, simply review from your computer’s document. Step 2: Restart the computer and check whether your USB malfunctioned issue persisted or not. And here lists many ways to fix the USB malfunctioned issue, you can have a check, hope can help you.
Hi, it may be something wrong with the driver software , it could be broken or outdated, so your hard drive not showing up on your PC. If you initialize it in device manager, you may suffer from data lose. You can update your driver first or troubleshoot the PC. If this way doesn’t work, you can initialize the drive. But in order not losing data, you can make a backup first or download a data recovery software.
There are two ways that you can have a try. Fix CRC error with Error checking utility or by running CHKDSK in Command Prompt. If these two solutions are unavailable, you may need to format your device. If you finally come to this way, don’t forget to restore your data.
I’ve also met such problem before, and the point of my issue is also not in USB and drivers, I tried to repair USB Root Hub and re-install USB device driver, but nothing worked. Finally,I updated the Motherboard’s Chipset Driver and finally solved my problem, hope this way is also workable for you. Step 1: Go to the Motherboard’s manufacturer website and find the latest Chipset Driver and then download it, follow the tutorial to update the driver. If you don’t know which manufacturer is, simply review from your computer’s document. Step 2: Restart the computer and check whether your USB malfunctioned issue persisted or not.
You can solve the error by using a command prompt. If you still could not remove “The parameter is incorrect” error using “CHKDSK” then quick formatting or high-level formatting is the next best solution.
You should first check if your external hard drive can be recognized or detected in Disk Management. if it cannot be recognized, you can try updating the driver, check for software updates . But maybe your hard drive was damaged, if all the ways you do are unavailable, you should ask for professor for help.
Firstly, you can try to connect your SD to PC to check whether it’s the problem of your SD card. I f you cannot format your SD card, you may meet the issue of SD Card Corruption. You can try the following ways: 1.Assign a new drive letter Enter into Disk Management and right-click on your SD card, choose “Change Drive Letter and Path” and assign a new drive letter to make it visible again. 2. Update the USB device driver. Enter into Device Manager by typing” devmgmt.msc” in the Win+R window, and then choose “Update Driver Software”. 3.Use CHKDSK to check your SD Card Error And if you lost your data during the formatting, you can use a data recovery software, or you can back up your picture in advance. Hope these ways can help you.
Your deleted photos may caused by antivirus. I think you can try the following ways. (1) Using CMD to recover deleted files by an Antivirus This is a manual method to retrieve deleted or hidden files that ask for some amount of technical expertise. (1) Go to the “Run” program or press windows key+R. (2) Enter “cmd” in the space provided. (3) Hit on “Enter” button. (4) Now, open “cmd” command line. (5) Type “attrib -h -r -s /s /d drive letter:*.*” (Replace Drive Letter to F: or the one you need). (6) Then, go to your flash drive. This will display all the files and folders. You can select the required file or folder from here and delete rest of the files. ## You can use a data recovery software, it is a quick way to get back your lost photo. And I have used the Bitwar Data Recovery. I think it’s a good software, it restores my files in very fast speed. You can have a try.
Check storage device connection As already stated above that the '''I/O device error''' could occur due to an improper connection! Thus, it is important to check for the USB connection. Step1. Remove the storage device from the current port and plug it into another port, cable or an adapter. Step2. Try to open the drive that you want. If the error was due to a faulty port then connecting a device to another port should help, else follow other solutions to fix the issue.