Why are the Labels on my Labelwriter 450 being cut off when printing?The label of the Labelwriter 450 is being cut off when I try to print why is that?
回复： Why is the print quality of my LabelWriter 450 not good?There are three possible solutions to the problem at hand. there’s third-party labels Labels that are not made by DYMO may not work with your LabelWriter. 3rd party labels may have different thermal sensitivity than DYMO labels, and the perforated holes on 3rd party labels may not be recognizable by the device. Make sure your labels are genuine DYMO LabelWriter brand labels. Dirty print heads To clean the print head, first remove the label roll by lifting the lid and pressing the black-and-white eject button on the right-hand side of the device. Clean the print head and the bottom of the label roll with a small, soft brush or cotton swab. and old or defective labels It is also possible that the label roll in the device is old, or has become defective. To check for a defective roll, insert a different roll from a new box. If the new roll produces a print with no problems, it means that the old roll was old or defective.
回复： Why does my Dymo LabelWriter 450 not turn on?Check that your LabelWriter is properly receiving power by making sure the power adapter is plugged in all the way into the back of the device. If that doesn’t work check to make sure that your device is inserted all the way into the wall jack. The power adapter that comes with the LabelWriter ends in a large box, so it is possible that it may have come loose in the wall jack.