Hi, you don’t need any fixing store to fix it. Probably the issue with the metal pin, which brings rotation power from the motor to the blades. Check how I repaired my blender, easily on repair your blender, easy fix video. And it will costs you few cents, in the repair shop they will charge you at least 10$ for the fix.
I got exactly the same issue, my blender stopped to spin, and, I found the issue was in metal drive pin. I bough the one in the hardware store close to my house, and it cost my cents. Watch how I did repair of my blender in the '''Oster Ozterizer blender repair - small fix''' video. You don’t need to much to fix it, just a screw drivers.
Hi, in my case I only needed a screw driver, but of cause, it depends on what actually is broken. If you just need to replace the small metal drive pin which you can probably find in a close hand tools shop, so no more tools need for it. Watch how I did in my blender easy and fast repair video. But if you need to do some wire replacement or engine replacement, you may need more tools, including a soldering.
Hi, be careful with the bad quality screens. I called to Asus itself, they don’t sell original screens. So the screens that you can find are from alternative manufacturers. Check this video: https://www.youtube.com/watch?v=YT1Skjqm... you’ll see full guide about screen replacement, and the links to the “Bad” sellers, who sells bad quality screens. In my case, I’m keep looking for the reliable seller.
Battery replacement is pretty easy procedure for Asus Zenbook series. You also can check on my video how to replace the motherboard, which is more complex, but can be accomplished with mid level of experience.. https://www.youtube.com/watch?v=jJLl5DhY...
Even the video is for another model, you still can apply the same technique to another models from Zenbook series.
BTW. if you have broken video chip (like it was on my case), or any other chip on motherboard, you can easily buy replacement motherboard and replace it yourself. Check my youtube video about MB replacement on Asus UX51VZ, which is pretty similar to this one: https://www.youtube.com/watch?v=jJLl5DhY...
But I still have the same problem as before, there is some point on mb which makes laptop to turn off. I temporary fixed it by putting some insulation on the right down corner on Motherboard.
Battery replacement is pretty easy procedure for Asus Zenbook series. You also can check on my video how to replace the motherboard, which is more complex, but can be accomplished with mid level of experience.. https://www.youtube.com/watch?v=jJLl5DhY...
Even the video is for another model, you still can apply the same technique to another models from Zenbook series.
BTW. if you have broken video chip (like it was on my case), or any other chip on motherboard, you can easily buy replacement motherboard and replace it yourself. Check my youtube video about MB replacement on Asus UX51VZ, which is pretty similar to this one: https://www.youtube.com/watch?v=jJLl5DhY...
But I still have the same problem as before, there is some point on mb which makes laptop to turn off. I temporary fixed it by putting some insulation on the right down corner on Motherboard.