I had the same problem. The #00 screwdriver worked for some of the screws but some others were too tight and I had to use a #000. Maybe it was because the cover had slightly bent because the battery inside had basically doubled its width, but I still found that the #000 was a much better fit for these screws. Even the ones that came out with the #00 came out much easier with the #000. I would suggest updating this guide to suggest using a #000.
写评论“MacBook Pro 13" Unibody Mid 2009 Lower Case Replacement”。
成功完成MacBook Pro 13" Unibody Mid 2010 Hard Drive Replacement。
成功完成MacBook Pro 13" Unibody Mid 2010 RAM Replacement。
成功完成MacBook Pro 13" Unibody Mid 2010 Battery Replacement。