回答“I Separated the LCD from the digitizer!”It is very easy take of the back of the phone take battery out of the phone. Begin unscrewing the logic board of the phone. Unscrew LCD take off LCD and get a heat gone gun, or a hair blow dryer. Place heat gun over screen, and insure that the heat gun didn't travel pass 95°F if in case of mistake of an over pass of temp you will possibly damage your LCD. After heating the LCD UV glue you would be able to stick a pick or blade through the LCD and digitizer. REHEATING may take place I sincerely am !!WARNING YOU TO TAKE YOUR TIME TO PREVENT POSSIBLE DAMAGE TO THE LCD!! After your done put new screen on and reassemble phone the way taken apart. YOU MAY NOW SAY YOUR FINISHED.