This is a terrific guide. Thank you very much for providing it.
Some of the screws may be different sizes in different 'books. Keeping them separated, or measuring as you remove them, helps. Also, a few of the rubber spacers, etc are not the same in mine as in the photos, and some connectors also differ. I found it helpful to take notes at each Step when they differed from the picture. A guitar pick helps when trying to get the top case free.
loner on the left on mine
all were 9 mm on mine
no spacer on mine
When re-installing, see the photo in Step 14 regarding where the cables go
temporarily removing the cable clamp just to the screen side above it also helps in moving the cabling out of the way at this step
if you pull the connector apart, like I did (sigh), the red wire goes towards the screen.
mine are both at the right-sided location
mine has a black cover over the silver, and no clip
the back center tends to catch on the frame; takes some wiggling
1 / 2 页