跳转到主内容

你所需要的

这个拆解是不是维修指南。 要维修你的的Xbox One Wireless Controller Model 1537,请使用我们的维修手册

  1. Xbox One Wireless Controller Teardown, Get an Xbox One Controller: 步骤 1 中的图像 1,1
    • Start off with having an Xbox One Controller (:

  2. Xbox One Wireless Controller Teardown, Remove First Screw: 步骤 2 中的图像 1,2 Xbox One Wireless Controller Teardown, Remove First Screw: 步骤 2 中的图像 2,2
    • Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker.

  3. Xbox One Wireless Controller Teardown, Remove side panels: 步骤 3 中的图像 1,3 Xbox One Wireless Controller Teardown, Remove side panels: 步骤 3 中的图像 2,3 Xbox One Wireless Controller Teardown, Remove side panels: 步骤 3 中的图像 3,3
    • Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun.

  4. Xbox One Wireless Controller Teardown, Remove all screws: 步骤 4 中的图像 1,1
    • By removing all side panels all 5 T8 security screws have appeared!

  5. Xbox One Wireless Controller Teardown, Remove Faceplate: 步骤 5 中的图像 1,3 Xbox One Wireless Controller Teardown, Remove Faceplate: 步骤 5 中的图像 2,3 Xbox One Wireless Controller Teardown, Remove Faceplate: 步骤 5 中的图像 3,3
    • Once you removed the T8 security screws remove the front face plate.

  6. Xbox One Wireless Controller Teardown, Tape down rumble motors: 步骤 6 中的图像 1,2 Xbox One Wireless Controller Teardown, Tape down rumble motors: 步骤 6 中的图像 2,2
    • Tape down the rumbler motors to prevent them from falling out.

  7. Xbox One Wireless Controller Teardown, Remove T6 screws: 步骤 7 中的图像 1,3 Xbox One Wireless Controller Teardown, Remove T6 screws: 步骤 7 中的图像 2,3 Xbox One Wireless Controller Teardown, Remove T6 screws: 步骤 7 中的图像 3,3
    • Remove the T6 screws to remove the PCB's.

    • It takes a pull to seperate the connectors.

    • Watch the wires! You can not fully remove the circuit board without removing the wires and it requires soldering.

  8. Xbox One Wireless Controller Teardown: 步骤 8 中的图像 1,3 Xbox One Wireless Controller Teardown: 步骤 8 中的图像 2,3 Xbox One Wireless Controller Teardown: 步骤 8 中的图像 3,3
    • Remove the top cover, it folds over.

    • There are 6 T6 screws to remove.

  9. Xbox One Wireless Controller Teardown: 步骤 9 中的图像 1,3 Xbox One Wireless Controller Teardown: 步骤 9 中的图像 2,3 Xbox One Wireless Controller Teardown: 步骤 9 中的图像 3,3
    • Remove the circuit board

    • Under the rubber is the A B X Y buttons.

  10. Xbox One Wireless Controller Teardown: 步骤 10 中的图像 1,3 Xbox One Wireless Controller Teardown: 步骤 10 中的图像 2,3 Xbox One Wireless Controller Teardown: 步骤 10 中的图像 3,3
    • Follow the instructions in reverse to get everything together again. :D

ubaldo gutierrez

于11/07/16注册

262 声望

撰写一个指南

16条评论

Very good instructions...

Chadwick Posey - 回复

Nice instructions. I need to take apart mine and replace the d-pad. The previous owner was a bit... rough. Sometimes it doesn't work or it clicks twice. Cheers!

Johnathan - 回复

Do you think that you can label the internals of the controller.

David Becerra - 回复

I have a custom controller from the xbox design labs. I want to change the led on the front.

Can someone point out the model/ size led I would need?

Alajandro - 回复

How do you put the sync buttom back in? Which way does it face?

Throaty Sea5 - 回复

添加评论

浏览统计数据:

过去 24 小时: 52

过去 7 天: 356

过去 30 天: 1,435

总计 172,243