修复你的物品 社区 商店

Xbox One Wireless Controller 1697 Teardown

撰写者： Bito Zapata (和另外4个贡献者)
发布于： August 27, 2015
  • 评论： 22
  • 收藏 17
  • 浏览量 70.7千

Xbox One Wireless Controller 1697 Teardown

撰写者： Bito Zapata (和另外4个贡献者)
发布于： August 27, 2015
  • 评论： 22
  • 收藏 17
  • 浏览量 70.7千

拆解

简介

Microsoft has launched a new version of its official Xbox One Wireless Controller. It has a 3.5mm stereo headset jack, which will allow most third-party gaming headsets to directly connect to the controller for the first time.

你所需要的

这个拆解是不是维修指南。 要维修你的的Xbox One Wireless Controller 1697，请使用我们的维修手册。

  1. Xbox One Wireless Controller 1697 Teardown, XBOX One Wireless Controller: 步骤 1 中的图像 1，2 Xbox One Wireless Controller 1697 Teardown, XBOX One Wireless Controller: 步骤 1 中的图像 2，2

    • Covert Forces model - Bowie 'Changes' look.

    • New 3.5mm jack socket next to expansion port.

    编辑

  2. Xbox One Wireless Controller 1697 Teardown, Remove plastics: 步骤 2 中的图像 1，3 Xbox One Wireless Controller 1697 Teardown, Remove plastics: 步骤 2 中的图像 2，3 Xbox One Wireless Controller 1697 Teardown, Remove plastics: 步骤 2 中的图像 3，3

    • Remove battery cover and battery

    • Remove side panels using spudger

    • Expose T9 security screw under label

    • Remove 5 x T9 security screws from chassis

    • Remove top and bottom covers

    编辑

  4. Xbox One Wireless Controller 1697 Teardown, Tape down rumble motors: 步骤 3 中的图像 1，2 Xbox One Wireless Controller 1697 Teardown, Tape down rumble motors: 步骤 3 中的图像 2，2

    • Tape down the rumbler motors to prevent them from falling out.

    编辑

  5. Xbox One Wireless Controller 1697 Teardown, Seperate PCB's: 步骤 4 中的图像 1，2 Xbox One Wireless Controller 1697 Teardown, Seperate PCB's: 步骤 4 中的图像 2，2

    • Remove 2 x T6 security screws on bottom PCB

    • De-solder rumble pack and trigger wiring

    编辑

  6. Xbox One Wireless Controller 1697 Teardown, CODEC and Jack Socket: 步骤 5 中的图像 1，2 Xbox One Wireless Controller 1697 Teardown, CODEC and Jack Socket: 步骤 5 中的图像 2，2

    • Thar she blows! DA7212

    • Dialog Semiconductor CODEC with Class G HP AMP and Class AB speaker driver.

    • CODEC sits next to contact pads for 3.5mm jack socket

    编辑

作者

与4其他贡献者

Bito Zapata

于08/27/15注册

158 声望

撰写一个指南

徽章: 0

15条评论

Is it possible to show the other board? Was thinking of doing a scuf-style mod to one of these... Thanks

blazeclarkebcc - 回复

Was asking this because the boards are different to the older controller. I have PCB prints of the old one, but not the new one. Thanks.

blazeclarkebcc -

Can you point me where to get schematics that you have?

Piotr Zieliński -

Anybody know where I can get the new style bumpers for this style of controller? Any help would be greatly appreciated.

Rhys Jones - 回复

The guy I buy from on ebay said they would be available at the end of January

themadmaxof07 -

添加评论

浏览统计数据:

过去 24 小时： 13

过去 7 天： 54

过去 30 天： 286

总计 70,708