跳转到主内容

你所需要的

这个拆解是不是维修指南。 要维修你的的Xbox 360 Wireless Controller,请使用我们的维修手册

  1. Xbox 360 Wireless Controller Teardown, Removing the first screws: 步骤 1 中的图像 1,3 Xbox 360 Wireless Controller Teardown, Removing the first screws: 步骤 1 中的图像 2,3 Xbox 360 Wireless Controller Teardown, Removing the first screws: 步骤 1 中的图像 3,3
    • Place the controller face down on your working surface to allow access to rear screws.

    • Take the battery compartment out.

    • Use a TR9 bit and screwdriver to remove all 7 screws.

  2. Xbox 360 Wireless Controller Teardown, Removing the back: 步骤 2 中的图像 1,2 Xbox 360 Wireless Controller Teardown, Removing the back: 步骤 2 中的图像 2,2
    • Remove the rear half of the controller by pulling perpendicular to the front half.

    • The battery terminals have specific grooves that they slide in and out of.

    • If the two halves do not easily separate, you can slide a spudger along the seam and/or slightly depress the left/right triggers.

  3. Xbox 360 Wireless Controller Teardown, Removing the vibration motors: 步骤 3 中的图像 1,2 Xbox 360 Wireless Controller Teardown, Removing the vibration motors: 步骤 3 中的图像 2,2
    • Detach the vibration motor cable from the PCB.

    • DO NOT use the cable to remove from the PCB. You may damage the motor, connector, or PCB by pulling on the cable.

    • After detaching the vibration motor cable from the PCB, remove the vibration motor.

    • Utilize the same technique for the other vibration motor on the opposite side.

  4. Xbox 360 Wireless Controller Teardown, Removing the PCB: 步骤 4 中的图像 1,2 Xbox 360 Wireless Controller Teardown, Removing the PCB: 步骤 4 中的图像 2,2
    • Make sure the front half of the controller is facing towards you.

    • The PCB should simply lift out with little to no force when being held by the areas highlighted.

    • If the PCB doesn't freely lift out, apply light consistent leverage under the highlighted area.

    • Be cognizant of the components on the opposing side of the PCB.

  5. Xbox 360 Wireless Controller Teardown: 步骤 5 中的图像 1,1
    • Full IC Identification:

    • You may need to enlarge it to view the text.

  6. Xbox 360 Wireless Controller Teardown, Removing the buttons and the bumper: 步骤 6 中的图像 1,3 Xbox 360 Wireless Controller Teardown, Removing the buttons and the bumper: 步骤 6 中的图像 2,3 Xbox 360 Wireless Controller Teardown, Removing the buttons and the bumper: 步骤 6 中的图像 3,3
    • Gently peel off the conductive rubber pads to expose the backsides of the buttons

    • Remove the A, B, X, Y, Back, Start and Guide buttons. The Guide button sleeve may also be removed.

    • You can now remove the bumper assembly at the top.

  7. Xbox 360 Wireless Controller Teardown, Removing the D-Pad: 步骤 7 中的图像 1,1
    • Remove the last two screws in the D-pad with a #0 Phillips screwdriver.

    • Use a pair of tweezers to squeeze the clips together and remove the D-pad.

  8. Xbox 360 Wireless Controller Teardown, End result: 步骤 8 中的图像 1,1
    • And here is the final result: a completely disassembled Xbox 360 Wireless Controller.

Mart-Jan

于05/26/19注册

305 声望

撰写一个指南

3条评论

Excelente trabajos

RIGO NOLASCO - 回复

Very clear, helped me clean my controller. Thank you :)

Taydolf Swiftler - 回复

Hello. I just did clean one of mine that i did bye 2011. The Rumble on left end right are the opposit to this guide.

I did never disconnect them from the pcb. So ma bey its another revision or the left and right is missing.

From the back.

Small left , big right.

https://imgur.com/a/DxXdUNB

Michael Orban - 回复

添加评论

浏览统计数据:

过去 24 小时: 46

过去 7 天: 225

过去 30 天: 975

总计 38,589