在此拆机指南中使用的工具

简介

Teardown of the TI BA II Plus calculator.

这个拆解是不是维修指南。 要维修你的的Texas Instruments TI BA II Plus,请使用我们的维修手册

  1. The BA II Plus Professional calculator.
    • The BA II Plus Professional calculator.

  2. Firstly on the back cover, remove the small sticky soft cushioning material covering the recess with the screws in it. 4 of them in total. Unscrew them.
    • Firstly on the back cover, remove the small sticky soft cushioning material covering the recess with the screws in it. 4 of them in total. Unscrew them.

  3. Remove the battery cover by sliding it out.
    • Remove the battery cover by sliding it out.

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. Use a flathead screwdriver to gently part the bottom and top cover at the hinge on the top.
    • Use a flathead screwdriver to gently part the bottom and top cover at the hinge on the top.

  6. Removing the back cover to reveal the foil, unscrew the 4 screws holding the foil and 4 other holding the printed circuit board to the front cover.
    • Removing the back cover to reveal the foil, unscrew the 4 screws holding the foil and 4 other holding the printed circuit board to the front cover.

  7. Remove the foil. Ensure all screws are off.
    • Remove the foil. Ensure all screws are off.

  8. This must separate the front cover from the board. Remove the board and turn it over to view the front side with a soft black cushion cover over a smooth shinny mesh.
    • This must separate the front cover from the board. Remove the board and turn it over to view the front side with a soft black cushion cover over a smooth shinny mesh.

  9. The keys should fall out of the front cover when you turn it over as well.  Thats it!!!
    • The keys should fall out of the front cover when you turn it over as well. Thats it!!!

VSP

于2013年06月23日注册

101 信誉积分

撰写一个指南

Well, my TI BA II plus has a broken LCD screen which according to the customer care is not covered under the warranty. Is it possible to find a replacement LCD to replace the broken one in the calculator.

Thanks

VSP - 回复

My calculated get in water, now its not working is there any way to repair it.

ankur - 回复

This is a terrific service that you are providing. It makes fixing thing so much easier. Thank you.

ROB LYTLE - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 43

总计 6,129