在此拆机指南中使用的工具

简介

This guide explains how to take apart the standard Tesco Value Kettle, so you can see its internal parts.

这个拆解是不是维修指南。 要维修你的的Tesco Value JK07 Kettle,请使用我们的维修手册

  1. Take your kettle and remove it from the base. Carefully remove the limescale filter by sliding it out from the lip.
    • Take your kettle and remove it from the base.

    • Carefully remove the limescale filter by sliding it out from the lip.

  2. Remove the screw from the bottom side of the lid. Disassemble the lid and remove the plastic piece inside. Disassemble the lid and remove the plastic piece inside.
    • Remove the screw from the bottom side of the lid.

    • Disassemble the lid and remove the plastic piece inside.

  3. Remove the button that opens the lid by sliding it out.
    • Remove the button that opens the lid by sliding it out.

  4. Remove the screws on the underside of the kettle to release the socket cover. Separate the handle from the kettle.
    • Remove the screws on the underside of the kettle to release the socket cover.

    • Separate the handle from the kettle.

  5. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  6. Remove the screws to separate the handle and the lid from the hinge. Remove the screws to separate the handle and the lid from the hinge.
    • Remove the screws to separate the handle and the lid from the hinge.

  7. Gently remove the switch cover. Remove the circular piece attached to the switch base  by gently pulling it away. Remove the circular piece attached to the switch base  by gently pulling it away.
    • Gently remove the switch cover.

    • Remove the circular piece attached to the switch base by gently pulling it away.

  8. Remove the screws from the socket at the back of the kettle. These screws also hold the socket together, so once they have been removed, it can be opened.
    • Remove the screws from the socket at the back of the kettle.

    • These screws also hold the socket together, so once they have been removed, it can be opened.

    • The components within the socket are clipped in. Remove the components by gently pulling.

  9. Remove the heating element. Remove the gasket.
    • Remove the heating element.

    • Remove the gasket.

    • Remove the plate beneath the heating element by bending the metal in the holes as shown in the picture. Remove the plate from the clips.

  10. Remove all the screws from the bottom, then gently separate the two halves.
    • Remove all the screws from the bottom, then gently separate the two halves.

  11. Then push the feet (B) out from the base (C).
    • Then push the feet (B) out from the base (C).

  12. The plug and cable (G) are held in by clips and can be pulled away.
    • The plug and cable (G) are held in by clips and can be pulled away.

    • The fuse (F) can be pulled away from inside the pins on the plug (G).

  13. The kettle is now fully disassembled.
    • The kettle is now fully disassembled.

    • There should be 26 separate parts, all shown here in this photo.

emily king

于2010年03月17日注册

21 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 15

总计 6,466