在此拆机指南中的精选工具

简介

I'm going to dissect an old friend, my first disc player. It is hoped that this teardown, while exposing the hydro-suspension and green-amber lighting, will reveal an awesomeness worthy of a Sony PS3 Slim (Gadget Lab Contest).

这个拆解是不是维修指南。 要维修你的的Sony D-822K Car Discman,请使用我们的服务手册

Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.
  • Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.

My gosh until now I totally forgot about this player, I had the exact same one for years !

Below - 回复

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

IanMaffett - 回复

Quote from IanMaffett:

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

It was expensive, wasn't it? I was expecting a little more sophistication in the suspension for the price.

modem21 - 回复

Oh, last week I found that missing illumination switch. When I put in, I'll try to fix the whining sound from the headphone output.

modem21 - 回复

Position unit so that the bottom is facing up. Remove the 6 screws.
  • Position unit so that the bottom is facing up. Remove the 6 screws.

  • Hold top and bottom of unit together as you turn the unit over, bottom facing down. Use caution; the upper and lower case, along with circuit board are now loose.

  • Watch out for the AVLS and illumination switches, they love to disappear when unsupervised. Remove top of case.

添加评论

Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader. Slide edge of ribbon cable connector towards ribbon cable to disengage. Unplug the red, white, and blue plugs from the circuit board.
  • Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader.

  • Slide edge of ribbon cable connector towards ribbon cable to disengage.

  • Unplug the red, white, and blue plugs from the circuit board.

添加评论

Observation: This is the Hydro Suspension system...really. Observation: This is the Hydro Suspension system...really.
  • Observation: This is the Hydro Suspension system...really.

添加评论

Remove circuit board Notice the dual-color light modules. (I temporarily connected the power to show off the lights) Notice the dual-color light modules. (I temporarily connected the power to show off the lights)
  • Remove circuit board

  • Notice the dual-color light modules. (I temporarily connected the power to show off the lights)

添加评论

Disconnect tailpiece, and power supply.
  • Disconnect tailpiece, and power supply.

添加评论

Remote: Remove the 3 screws from the bottom. Pull apart. The function buttons have a neat overlay design.
  • Remote: Remove the 3 screws from the bottom. Pull apart.

  • The function buttons have a neat overlay design.

添加评论

Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?
  • Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?

添加评论

modem21

于2009年10月09日注册

84 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 13

总计 16,421