在此拆机指南中使用的工具

简介

We disassembled this calculator on April 17, 2010.

这个拆解是不是维修指南。 要维修你的的Sanyo CX 110,请使用我们的维修手册

    • Here is the Sanyo CX 110 calculator.

  1. Now that we removed the back of the calculator, here is the battery and the back of the logic board. Sanyo Tight-Seal Power-Up Sum-3 1.5V AA battery.
    • Now that we removed the back of the calculator, here is the battery and the back of the logic board.

      • Sanyo Tight-Seal Power-Up Sum-3 1.5V AA battery.

      • Positive contact for the battery.

      • Negative contact for the battery.

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  3. Remove these 7 screws using a razor blade.
    • Remove these 7 screws using a razor blade.

    • Be careful not to break the razor blade because it is fragile.

    • Turn the circuit board 180 degrees after removing screws.

  4. You will now see the circuit board and the buttons. Remove the buttons for the calculator. You will now see the circuit board and the buttons. Remove the buttons for the calculator.
    • You will now see the circuit board and the buttons. Remove the buttons for the calculator.

  5. Now we're all done! Just take the LCD apart and you are done completely!
    • Now we're all done! Just take the LCD apart and you are done completely!

      • Sum-3 Sanyo Battery.

      • LCD Screen Parts (darkener, inverter, LCD screen.

      • Circuit Board for the calculator.

      • Buttons for the calculator (square root, memory, percent, operators, numbers, etc.)

      • Housing for the calculator.

samhnri

于2010年04月07日注册

417 信誉积分

创作了2篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 7

总计 4,869