在此拆机指南中使用的工具

简介

The Teardown is pretty much the same as other Samsung Slider phones

这个拆解是不是维修指南。 要维修你的的Samsung Intensity,请使用我们的维修手册

  1. Remove the back cover and battery
    • Remove the back cover and battery

  2. Remove the 8 screw that hold the back cover down.
    • Remove the 8 screw that hold the back cover down.

    • Carefully pry back piece off

    • Start at the bottom and work toward the top.

  3. Use the ipod opening tool to disconnect the Connector
    • Use the ipod opening tool to disconnect the Connector

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  5. Carefully remove the main board Make sure to not tear the microphone cable, pry it from the phone carefully
    • Carefully remove the main board

      • Make sure to not tear the microphone cable, pry it from the phone carefully

  6. Remove the 6 screws Pry to ribbon cable assembly loose from the slider
    • Remove the 6 screws

    • Pry to ribbon cable assembly loose from the slider

    • Its glued on the left and right side

  7. Remove the 4 screw the holds the slider to the phone assembly
    • Remove the 4 screw the holds the slider to the phone assembly

    • one of the screws will be behind the hinge

    • Carefully pry slider assembly loose from display assembly

  8. Remove the tape and pop the connectors and pull all the ribbon cables loose Carefully pry the speaker loose from the case. Carefully pry the speaker loose from the case.
    • Remove the tape and pop the connectors and pull all the ribbon cables loose

    • Carefully pry the speaker loose from the case.

  9. Carefully work the keyboard loose from the display assembly
    • Carefully work the keyboard loose from the display assembly

    • There are a couple fragile clips that hold it in place

  10. LCD comes out pretty easily Pry it from the bottom and work up the sides to release it if stuck
    • LCD comes out pretty easily

    • Pry it from the bottom and work up the sides to release it if stuck

    • The glass can be removed with a little heat from a heat gun or blow dryer

    • Pry it out from the outside edges working around carefully

David

于2011年08月10日注册

118 信誉积分

撰写一个指南

团队

West Georgia Technology West Georgia Technology 的会员

Business

1 名成员

创作了1篇指南

This was so helpful! How can I show my gratitude to you for these helpful instructions?

teh_pwnerer22 - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 11

总计 3,796