这个拆解是不是维修指南。 要维修你的的Rubik's Cube,请使用我们的维修手册

  1. Turn the top row so that each corner is roughly halfway between the sides Push the pieces up until they pop out of the cube, then, slide the rest out Repeat this process until you clear the level
    • Turn the top row so that each corner is roughly halfway between the sides

    • Push the pieces up until they pop out of the cube, then, slide the rest out

    • Repeat this process until you clear the level

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  3. You should be able to just directly pull out the rest of the blocks, like so And there you have it!
    • You should be able to just directly pull out the rest of the blocks, like so

    • And there you have it!

    • You'll have the center piece, with the six centers of the six sides, the turning mechanism

  4. To reassemble, snap all the pieces back into place, and try not to rotate the faces. It helps to start with the middle pieces first
    • To reassemble, snap all the pieces back into place, and try not to rotate the faces.

    • It helps to start with the middle pieces first

    • Don't be afraid to use force!

    • Once you have the middle pieces in it's pretty simple to just push in the corner pieces

    • Again- don't be afraid to use force!

rab777hp

于2009年11月17日注册

20,555 信誉积分

创作了3篇指南

团队

OPEN OPEN 的会员

Community

75 名成员

创作了15篇指南

I hated this thing. I disassembled mine with a .22 hollow point at 100 yards. Yes, It felt great!

mpias - 回复

lol don’t blame you, can’t stand the thing

Luke Legg -

that method just broke my rubiks my cube.. thanks anyway

hamzamagdy888 - 回复

浏览统计数据:

过去的24小时: 3

过去的7天: 21

过去的30天: 137

总计 18,950