在此拆机指南中的精选工具

简介

The insides of a nice bluetooth mouse by Razer.

这个拆解是不是维修指南。 要维修你的的Razer Pro Click Mobile,请使用我们的服务手册

The Razer Pro Click Mobile mouse served me well for over a year and a half. It's a compact bluetooth mouse that handles magnificently.
  • The Razer Pro Click Mobile mouse served me well for over a year and a half. It's a compact bluetooth mouse that handles magnificently.

  • Unfortunately, curiosity is not the only thing that drove me when I decided to do this teardown. The left button stopped working :(

  • therefore, I (am going to) FIX IT (see what i did there :] ?)

添加评论

And now, for the teardown. Open the battery compartment as you do every time this power hog runs out of juice. As you can see, i'm using rechargeables for that reason Pull the two marked plastic elements outwards.
  • And now, for the teardown. Open the battery compartment as you do every time this power hog runs out of juice. As you can see, i'm using rechargeables for that reason

  • Pull the two marked plastic elements outwards.

添加评论

Remove the two philips screws marked. There is a third screw under the sticker, on the underside of the mouse. The sticker breaks easily and this probably voids the warranty.
  • Remove the two philips screws marked.

  • There is a third screw under the sticker, on the underside of the mouse. The sticker breaks easily and this probably voids the warranty.

添加评论

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
You may now remove the main plastic cover. The plastics are very thick and look firm. My model survived a LOT of abuse, but apparently i dropped it one time too many for the left button to work.
  • You may now remove the main plastic cover.

  • The plastics are very thick and look firm. My model survived a LOT of abuse, but apparently i dropped it one time too many for the left button to work.

添加评论

Now we may remove the main board. The device consists of two chips The optical sensor is on the middle unit signed: A3030 B0741F
  • Now we may remove the main board.

  • The device consists of two chips

    • The optical sensor is on the middle unit signed: A3030 B0741F

    • The second chip is on a separate, blue board. On it there is a white sticker with "Razer" and N553_v1.2_ signed on it

  • The rest of the elements are LEDs, buttons, the wheel mechanism, a single capacitor and springs for the battery

添加评论

On the bottom we see the lens, the on/off switch and the reset button I love the little window they did for the capacitor.
  • On the bottom we see the lens, the on/off switch and the reset button

  • I love the little window they did for the capacitor.

  • The optical sensor looks freaky. I wonder which crazy government is watching me now.

添加评论

The batteries look enormous when inserted now. They weigh significantly more then the board itself.
  • The batteries look enormous when inserted now. They weigh significantly more then the board itself.

添加评论

For a size comparison, here is the mouse, the original iPhone, a 2 polish zloty coin and a party invitation :) For a size comparison, here is the mouse, the original iPhone, a 2 polish zloty coin and a party invitation :)
  • For a size comparison, here is the mouse, the original iPhone, a 2 polish zloty coin and a party invitation :)

I like the size comparison!

Mitra Cline - 回复

That blue board is probably the bluetooth daughterboard. The part towards the back of the mouse with just a few gold-colored traces on it is probably the antenna.

TuxRug - 回复

I got a question,

a friend tell me that bluetooth mouse use a usb protocol,

does that is true?

if so, can a bluetooth mouse board can be use to connect an usb mouse or keyboard to a bluetooth computer?

thx

emericrobert - 回复

baq

于2009年10月14日注册

305 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 9

总计 11,219