跳转到主内容

在此拆机指南中使用的工具

简介

This is a quick teardown of the playstation move controller.

这个拆解是不是维修指南。 要维修你的的PlayStation Move,请使用我们的维修手册

  1. Playstation Move Controller
    • Playstation Move Controller

  2. Remove the 4 screws holding the back over and trigger button on.
    • Remove the 4 screws holding the back over and trigger button on.

  3. Once open you will see two ribbon cables. The one connected to the trigger button is removable.
    • Once open you will see two ribbon cables.

    • The one connected to the trigger button is removable.

    • The ribbon cable attached to light globe is soldered on.

  4. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  5. Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated.
    • Light Globe Cover and the LED Module can be separated.

  6. The battery can easily be removed. There is connector on the side of the board.
    • The battery can easily be removed. There is connector on the side of the board.

    • Battery Specs: Single Cell 1380 mAh 3.7 Volt

    • Sony Part: LIS1441

  7. Remove the inner plastic (1 Screw) frame to expose the logic board
    • Remove the inner plastic (1 Screw) frame to expose the logic board

    • Remove the 2 top screws and one bottom screw to remove the logic board from the controller.

  8. Logic Board Chip Closeups Included 503A 04c ALPS - Radio Module
    • Logic Board

    • Chip Closeups Included

    • 503A 04c ALPS - Radio Module

    • AKM8974948D - MEMS Gyroscope

mcwiggin

608 信誉积分

创作了3篇指南

AKM 8974 - 3-axis Electronic Compass

Xeno - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 76

总计 13,283