在此拆机指南中使用的工具

简介

Follow this guide to completely disassemble your Palm IIIc.

这个拆解是不是维修指南。 要维修你的的Palm IIIc,请使用我们的维修手册

  1. Keep track of all pieces removed from the device.
    • Keep track of all pieces removed from the device.

    • Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

  2. Using a Phillips head screwdriver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
    • Using a Phillips head screwdriver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.

    • There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

  3. Using a spudger, carefully pry open the front and back covers along the side seam.
    • Using a spudger, carefully pry open the front and back covers along the side seam.

    • A small sensor cover will fall out when the front and back covers are removed. Keep track of it.

  4. Unhook battery cable from the motherboard and remove the battery.
    • Unhook battery cable from the motherboard and remove the battery.

  5. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  6. Behind the motherboard remove the brown plastic clamp and remove the front screen cover. Behind the motherboard remove the brown plastic clamp and remove the front screen cover.
    • Behind the motherboard remove the brown plastic clamp and remove the front screen cover.

  7. Unhook the blue and red screen cables. Unhook the blue and red screen cables.
    • Unhook the blue and red screen cables.

  8. Pop out the other two brown plastic clamps to release the screen and buttons. Pop out the other two brown plastic clamps to release the screen and buttons. Pop out the other two brown plastic clamps to release the screen and buttons.
    • Pop out the other two brown plastic clamps to release the screen and buttons.

  9. The black clips on the edges of the device (see picture) must be unclipped to remove the motherboard.
    • The black clips on the edges of the device (see picture) must be unclipped to remove the motherboard.

    • Carefully remove the motherboard from the device, pulling the motherboard away from the clips.

  10. Pull the screen out from the front.
    • Pull the screen out from the front.

  11. The object is now fully disassembled.
    • The object is now fully disassembled.

Paulina Trujillo

于2011年04月07日注册

241 信誉积分

创作了8篇指南

团队

Cal Poly, Team 20-69, Walters Spring 2011 Cal Poly, Team 20-69, Walters Spring 2011 的会员

CPSU-WALTERS-S11S20G69

5 名成员

创作了8篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 4,598