跳转到主内容

你所需要的

这个拆解是不是维修指南。 要维修你的的Nintendo Wii Remote,请使用我们的维修手册

  1. Nyko Wand Teardown, Removing battery cover and back plate: 步骤 1 中的图像 1,3 Nyko Wand Teardown, Removing battery cover and back plate: 步骤 1 中的图像 2,3 Nyko Wand Teardown, Removing battery cover and back plate: 步骤 1 中的图像 3,3
    • First flip controller so that the back plate faces you

    • Remove the battery cover by pushing up on the bottom plate

  2. Nyko Wand Teardown: 步骤 2 中的图像 1,2 Nyko Wand Teardown: 步骤 2 中的图像 2,2
    • Remove both batteries if their are any inside the remote .

    • To remove them press down on the positive end then pull to take out

  3. Nyko Wand Teardown: 步骤 3 中的图像 1,2 Nyko Wand Teardown: 步骤 3 中的图像 2,2
    • Using the tri-point Y1 Screw driver remove the two center screws by turning counter clock wise

    • Repeat process for bottom two

  4. Nyko Wand Teardown: 步骤 4 中的图像 1,3 Nyko Wand Teardown: 步骤 4 中的图像 2,3 Nyko Wand Teardown: 步骤 4 中的图像 3,3
    • To fully take off the back piece you will have to use your flat head screw driver and gently go along the edge and unclip it.

    • Gently pull out the whole circuit board ( be careful you may break or rip a wire if you pull to hard )

    • {CAUTION :WATCH OUT FOR SMALL PARTS}

  5. Nyko Wand Teardown: 步骤 5 中的图像 1,3 Nyko Wand Teardown: 步骤 5 中的图像 2,3 Nyko Wand Teardown: 步骤 5 中的图像 3,3
    • To remove the buttons you will simply have to take off the grey silicon cover.

    • To remove the small speaker you can simply pull up .

    • CAUTION : FOR SMALLER BUTTONS LIKE THE VOLUME ONES .

  6. Nyko Wand Teardown: 步骤 6 中的图像 1,2 Nyko Wand Teardown: 步骤 6 中的图像 2,2
    • Gently pry the buttons upwards ,removing the buttons from its holding slot.

    • CAUTION : WATCH OUT FOR SMALL BUTTONS !

    • IF YOU WANT TO REBUILD IT FOLLOW STEPS 1-7 BACKWORDS.

Demian De La Vega

于04/17/19注册

143 声望

撰写一个指南

一条评论

good¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡

RIGO NOLASCO - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 24

总计 2,385