在此拆机指南中的精选工具

简介

A Motorola V3i it's from the "RAZR" series.

The V3i had an improved camera resolution with 1,3Mpix and a external Memoryslot (MicroSD) for additional storage. Even if it had serveral problems with the keyboard and handling, it's one of the most sold mobilephones in the world.

这个拆解是不是维修指南。 要维修你的的Motorola V3i,请使用我们的服务手册

  1. A Motorola V3i!
    • A Motorola V3i!

    • Let's see what's inside...

    添加评论

  2. Let's turn it and take out the battery.
    • Let's turn it and take out the battery.

    • Remove these two screws.

    添加评论

    • Now you can easily flip the cover.

    添加评论

    • You need to detach these two plastic lashes from the surounding.

    • Now you can remove this transparent plastic case.

    • Now you can take out the speaker.

    • The metal thing on the end of the picture is the antenna.

    添加评论

    • So, that's the board.

    • Vibra motor.

    • Mini USB.

    • Connector for the antenna.

    • After I took these EMI shields away it looks like this...

    添加评论

    • Bluetooth chip by Broadcom.

    • 32Mbit PSRAM by STMicroelectronics.

    • Baseband Processor (Main Processor) by Freescale (90nm structure).

    • RF Transmitter by RF Micro Devices.

    • Battery controller by Freescale.

    • Quad-Band Transmit Module by RF Micro Devices.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove these 4 rubbers.

    • Then remove the four torx screws.

    • You can easily lose these rubbers. (That's why I have only 3 of them...)

    添加评论

    • Filp the device and you can remove the top housing.

    • Remove the three buttons on the side of the device.

    • Remove the connector to the mainboard...

    • and to the camera.

    The front cover can be very stubborn to remove as the clips may be very tight. Just persevere with your plastic opening tools. Two can be better than one here.

    Grahame - 回复

    • Remove the camera by lifting it up.

    • That's a 1,3Mpix camera!

    添加评论

    • Lift up the speaker.

    • Then, that's a tricky part,remove all the buttons around the screen housing. Caution: They are really thin and they easily break!

    • After you did this tricky part you can lift the top of the phone away.

    添加评论

    • Now lift up the front glass from the top of the device. It's held with adhesives.

    • After you did this it should look like this.

    添加评论

    • Around the screen there are some lashes. Detach them to release the screen of the metal housing.

    • Then you can lift the metal housing up.

    添加评论

    • The metal housing is very fragile!

    • an ATI Imageon chip! It's a mulitmedia co-processor, it is used for record video and mobile gaming. It support up to a 2Mpix camera.

    添加评论

    • Again there's a small lash on the botton of the front screen housing.

    • After that you can remove the front screen with the PCB.

    添加评论

    • The front screen.

    • Yes, my front screen has some dead pixels. (They are pink?!)

    添加评论

    • Thank you for reading my Teardown:)

    添加评论

Peddy

于2009年12月28日注册

149 信誉积分

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 6

过去的7天: 17

过去的30天: 53

总计 21,234