在此拆机指南中的精选工具

这个拆解是不是维修指南。 要维修你的的Motorola California Mobile Phone,请使用我们的服务手册

  1. Remove the battery by sliding it down the rails to which it is connected.
    • Remove the battery by sliding it down the rails to which it is connected.

    添加评论

  2. Find a flat head or Phillips head screwdriver.
    • Find a flat head or Phillips head screwdriver.

    • Insert the screwdriver into the holes in the plastic rod connecting the key pad guard to the rear casing.

    • Use the screwdriver to push the rods towards each other until they click out of their locked position.

    • Note: This may require a large amount of force.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

    • Simultaneously push the clips outward while lifting the rear casing and keyguard away from the front casing.

    • Remove the key guard from the rear casing by taking it out of its position.

    添加评论

    • Locate and unplug the black component of the antenna from the motherboard.

    • Under the black component should be a blue component. Unscrew this component in order to free the antenna.

    添加评论

    • Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.

    添加评论

    • Lift the motherboard out of its location in the front casing.

    • Do this slowly and gently so that none of the motherboard's components are damaged.

    添加评论

Andrew Lam

于2012年04月17日注册

28 信誉积分

创作了4篇指南

团队

Cal Poly, Team 9-46, Regan Spring 2012 Cal Poly, Team 9-46, Regan Spring 2012 的会员

CPSU-REGAN-S12S9G46

5 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 5

过去的30天: 9

总计 7,067