Model CVS124A Teardown

撰写者：任心怡 (和另外一个贡献者)

发布于： October 16, 2018

评论： 0
收藏 0
浏览量 750

Model CVS124A Teardown

撰写者：任心怡 (和另外一个贡献者)

发布于： October 16, 2018

评论： 0
收藏 0
浏览量 750

拆解

简介

The hair dryer is an electromechanical device that blows ambient or hot hair over damp hair to speed the evaporation of water to dry the hair. Developed during the early-1920s in Germany. After decades of development, the hair dryer becomes a daily device to dry hair and style.

你所需要的

这个拆解是不是维修指南。要维修你的的Model CVS124A，请使用我们的维修手册。

步骤 1 Screws Removal

Model CVS124A Teardown, Screws Removal: 步骤 1 中的图像 1，1

Locate the screw on the handle and remove them with a Phillips screwdriver.
All of the hair dryer’s components are held together by these two screws. Parts may quickly separate after screw removal.

翻译

步骤 2 Handle removal (top)

Model CVS124A Teardown, Handle removal (top): 步骤 2 中的图像 1，2

Model CVS124A Teardown, Handle removal (top): 步骤 2 中的图像 2，2

Remove the top portion of the handle.
The model information and warnings are engraved on the top portion.

翻译

步骤 3 Switch removal

Model CVS124A Teardown, Switch removal: 步骤 3 中的图像 1，1

Remove the settings switch by lifting straight up.

翻译

步骤 4 Inside component removal

Model CVS124A Teardown, Inside component removal: 步骤 4 中的图像 1，1

Remove the internal switch from the rear portion of the handle.

翻译

步骤 5 Handle removal (lower)

Model CVS124A Teardown, Handle removal (lower): 步骤 5 中的图像 1，1

Remove the lower portion of the handle by sliding the peg out of the slot at the top of the handle.

翻译

步骤 6 Material of the handle

Model CVS124A Teardown, Material of the handle: 步骤 6 中的图像 1，1

Handle - ABS injection moulding

翻译

步骤 7

Take off the protective jacket outside the wire.

翻译

步骤 8

Separate the iron case with the back case by using 6.5mm flathead screwdriver. Take off the fan after separation.
Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

翻译