Modal MD-WORCSS6 Teardown Guide

撰写者： Luke Timmerman (和另外3个贡献者)

发布于： December 20, 2019

评论： 0
收藏 0
浏览量 403

Modal MD-WORCSS6 Teardown Guide

撰写者： Luke Timmerman (和另外3个贡献者)

发布于： December 20, 2019

评论： 0
收藏 0
浏览量 403

拆解

简介

The full teardown of the MODAL WORCSS6 wine opener gives the user access to many of the critical internal components of the device for ease of repair and replacement.

你所需要的

本篇指南是分解流程而非维修指南。如果您要维修您的Modal MD-WORCSS6，应参考我们的维修指南。

步骤 1 Modal MD-WORCSS6 Teardown Guide

Modal MD-WORCSS6 Teardown Guide, Modal MD-WORCSS6 Teardown Guide: 步骤 1 中的图像 1，2

Modal MD-WORCSS6 Teardown Guide, Modal MD-WORCSS6 Teardown Guide: 步骤 1 中的图像 2，2

Put on Electrostatic Discharge (ESD) bracelet. Hold the device with the transparent plastic casing on the top.
Using the jimmy tool, carefully pry off the black plastic ring.
Remove the spring assembly from inside the transparent plastic tube.

编辑

步骤 2

Using a Phillips #1 screwdriver, unscrew each of the four 12.7 mm screws inside and at the bottom of the plastic tube.
Take the plastic tube off of the metal casing.

编辑

步骤 3

Place the jimmy tool blade between the button assembly and the metal casing. Gently pry off the button assembly; it should pop out.
With the button assembly removed, slide off the metal casing.

编辑

步骤 4

Modal MD-WORCSS6 Teardown Guide: 步骤 4 中的图像 3，3

Unscrew the two 6.4 mm screws in the black plastic body using the Phillips #1 screwdriver.
Separate the two halves of the plastic body. Keep the half containing the motor facing up.

编辑