跳转到主内容

你所需要的

这个拆解是不是维修指南。 要维修你的的MacBook Unibody Model A1342,请使用我们的维修手册

  1. MacBook Unibody Model A1342 Mid 2010 Teardown, MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 1 中的图像 1,1
    • The new revision of the MacBook Unibody Model A1342 has been kind enough to grace us with its presence.

    • Tech Specs:

    • 2.4 GHz Intel Core 2 Duo processor with 3 MB on-chip L2 shared cache.

    • NVIDIA GeForce 320M graphics processor with 256 MB of shared DDR3 SDRAM.

    • 10 hour 63.5 Wh lithium-polymer battery.

    • Mini Display port with audio out support. *GASP*

  2. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 2 中的图像 1,2 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 2 中的图像 2,2
    • Much like its predecessor, the lower case is held by eight Phillips #00 screws.

  3. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 3 中的图像 1,3 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 3 中的图像 2,3 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 3 中的图像 3,3
    • The battery looks very similar to the previous one. So similar, in fact, that it's identical in size and shape, and has the same model number (A1331).

    • Even so, it still makes continued use of Tri-Wing screws to secure the battery in place. Why Apple? Why? Why can't you free us from the oppression and tyranny that is Tri-Wing screws?

    • Be wary though...appearances can be deceiving, and that is certainly the case here.

    • The battery in the A1342 Mid 2010 is 63.5 watt-hours and weighs 355 grams.

    • In contrast, the earlier A1342 has a battery of 60 watt-hours and weighs 347.5 grams.

  4. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 4 中的图像 1,2 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 4 中的图像 2,2
    • Lo and behold, the new battery works in the A1342!

    • Both of these screenshots were taken from the previous iteration, the MacBook Unibody A1342.

    • You can get an extra 350 mAh of juice if you're willing to add 7.5 grams to your "older" MacBook.

  5. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 5 中的图像 1,2 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 5 中的图像 2,2
    在这个步骤中使用的工具:
    T6 Torx Screwdriver
    $9.99
    购买
    • After removing two Phillips screws and the hard drive bracket, lift the drive out of the MacBook by its pull tab and disconnect the SATA connector.

    • If you're installing a new hard drive, you'll need a T6 Torx screwdriver to transfer the mounting screws to your new hard drive.

  6. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 6 中的图像 1,2 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 6 中的图像 2,2
    • Removing the speaker assembly and AirPort/Bluetooth board requires a bit of work, but nothing we at iFixit can't handle.

    • Bluetooth model number is BCM943224PCIEBT.

    • This is the same card used in the previous model, the A1342.

  7. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 7 中的图像 1,1
    • After removing the final few screws, lift the optical drive out of its comfy abode.

    • You'll be glad to know that MacBook Unibody Model A1342 Mid 2010 continues to use the 8x SATA superdrive manufactured by Panasonic, model UJ898.

  8. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 8 中的图像 1,2 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 8 中的图像 2,2
    • Removal of the fan was no biggie. It simply required a Phillips screwdriver and a spudger.

  9. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 9 中的图像 1,3 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 9 中的图像 2,3 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 9 中的图像 3,3
    • Obviously the logic board needs to come out, or else this isn't a teardown.

    • With the flick of our trusty spudger, we continue to disconnect several connectors around the perimeter of the logic board, as well as removing the RAM.

    • Carefully maneuver the logic board assembly out of the upper case.

  10. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 10 中的图像 1,1
    • The heat sink must be removed prior to revealing the newly optimized processor and graphics chips.

  11. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 11 中的图像 1,2 MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 11 中的图像 2,2
    • Parts numbers found thus far:

    • Intel Core 2 Duo Mobile Processor E006B705 SLDGZ AV80577P8600 2.40/3M/1066

    • NVIDIA GeForce 320M integrated chipset graphics card: The successor to the GeForce 9400M.

    • Realtek RTL8251CA GigE Ethernet

    • CYPRESS CY8C24 16 KB Flash PSoC

    • TDK 6T213HF

    • Cirrus Logic 4206ACNZ

  12. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 12 中的图像 1,1
    • The display assembly is secured by two large T8 screws, one on each side.

    • Shameless plug: We sell a screwdriver kit that will enable you to remove these screws.

  13. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 13 中的图像 1,1
    • In Apple's everlasting effort to aid in the reduction of environmental impacts, the LED-backlit display in the MacBook A1342 and Mid 2010 A1342 are Mercury-free.

    • Wondering how to replace the display assembly? Well look no further, simply follow these steps and you'll be up and running in no time.

    • Spoiler alert: Coming soon to a browser near you, replacing the LED-backlit display...stay tuned!

  14. MacBook Unibody Model A1342 Mid 2010 Teardown: 步骤 14 中的图像 1,1
    • Disclaimer: No MacBooks were hurt, in any way, shape, or form, during the process of this teardown.

    • Now that we've taken care of that legal mumbo jumbo that some people care about (most people don't), here is the final layout of what used to be a MacBook Unibody Model A1342 Mid 2010.

12条评论

Step 3

New battery is 63.5 watts not 65

mkaz13 - 回复

Just wanted to let people know, the A1278 13" macbook pro 'black' keyboard is interchangeable with the 'white' 2009/2010 macbook A1342 .. It looks pretty cool to! :) . Just remove the metal bracket and use epoxy to stick the keyboard and metal bracket back on :). Cheers.

techetc - 回复

Including the Backlight? That'd be crazy awesome!

Maximilian Willert -

I don’t think the backlight would work because there is no hardware to power it present on the logic board of the MacBook

Isaiah Hollingworth -

Many thanks for this awesome teardown!

Maximilian Willert - 回复

添加评论

浏览统计数据:

过去 24 小时: 7

过去 7 天: 33

过去 30 天: 145

总计 189,684