跳转到主内容

你所需要的

这个拆解是不是维修指南。 要维修你的的MacBook Pro 15" Retina Display Mid 2015,请使用我们的维修手册

  1. MacBook Pro 15" Retina Display Mid 2015 Teardown, Lower Case: 步骤 1 中的图像 1,1
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.1 mm

    • Two 2.3 mm

  2. MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 2 中的图像 1,2 MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 2 中的图像 2,2
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

  3. MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 3 中的图像 1,3 MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 3 中的图像 2,3 MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 3 中的图像 3,3
    • The lower case has two plastic pegs (red) that fit into plastic clips in the upper case (orange).

    • During reassembly, gently push down the center of the lower case to reattach the case to its two plastic clips.

  4. MacBook Pro 15" Retina Display Mid 2015 Teardown, Battery Connector: 步骤 4 中的图像 1,1
    • Peel back the sticker covering the battery connector.

  5. MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 5 中的图像 1,3 MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 5 中的图像 2,3 MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 5 中的图像 3,3
    • Gently lift each side of the battery connector to pry the connector out of its socket on the logic board.

    • Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. MacBook Pro 15" Retina Display Mid 2015 Teardown, SSD: 步骤 6 中的图像 1,1
    • Remove the single 2.9 mm T5 Torx screw securing the SSD to the logic board.

  7. MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 7 中的图像 1,3 MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 7 中的图像 2,3 MacBook Pro 15" Retina Display Mid 2015 Teardown: 步骤 7 中的图像 3,3
    • Lift the end of the SSD up enough to pass over the speaker directly behind it.

    • Do not lift the SSD too high, or you could damage the contacts or socket.

    • Pull the SSD straight out of its socket on the logic board.

Terry Salt

于02/10/20注册

69 声望

撰写一个指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 4

过去 7 天: 44

过去 30 天: 231

总计 8,308