跳转到主内容

修复你的物品

维修的权力

商店

本拆机指南正在进行中 – 定期刷新以看到更新!

在此拆机指南中使用的工具

简介

How to take apart the M6013 Capacitor Meter

  1. Remove the circled screw Remove battery case and batteries
    • Remove the circled screw

    • Remove battery case and batteries

  2. Remove circled screws Pull case apart Watch out for buttons, they will fall out easily.
    • Remove circled screws

    • Pull case apart

    • Watch out for buttons, they will fall out easily.

  3. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  4. Remove circled screws Be careful when removing the circuit board, the battery cable is still connected. Unsolder the square locations either on the circuit board or the case to fully remove the circuit board
    • Remove circled screws

    • Be careful when removing the circuit board, the battery cable is still connected.

    • Unsolder the square locations either on the circuit board or the case to fully remove the circuit board

  5. Location of microprocessor Location of microprocessor
    • Location of microprocessor

  6. Remove the cable connector Remove Display
    • Remove the cable connector

    • Remove Display

Ted Hsueh

于2012年09月20日注册

170 信誉积分

创作了3篇指南

团队

Cal Poly, Team 16-56, Forte Fall 2012 Cal Poly, Team 16-56, Forte Fall 2012 的会员

CPSU-FORTE-F12S16G56

5 名成员

创作了7篇指南

Add some specs on start and foto of the unit ....

Mateusz - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 396