菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

Linksys BEFW11S4 Teardown

撰写者： William (和另外5个贡献者)
发布于： April 18, 2010
  • 评论： 2
  • 收藏 7
  • 浏览量 8.4k

拆解

在此拆机指南中使用的工具

购买这些工具

简介

This wireless router stopped working, so I wanted to take a look at it's innards.

这个拆解是不是维修指南。 要维修你的的Linksys BEFW11S4，请使用我们的维修手册。

  1. Waiting to be disassembled...

    • Waiting to be disassembled...

    翻译

  2. Remove antennas. Remove nuts and washers around antenna connectors. Push in antenna connectors.

    • Remove antennas.

    • Remove nuts and washers around antenna connectors.

    • Push in antenna connectors.

    翻译

  3. Remove feet (with flat-head screwdriver, fingernails, etc). Unscrew the screws. Unscrew the screws.

    • Remove feet (with flat-head screwdriver, fingernails, etc).

    • Unscrew the screws.

    翻译

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修，即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  5. Pull apart blue front from black back with a LOT of force. Slide and pull up bottom. (Make sure the antenna connectors get through.)

    • Pull apart blue front from black back with a LOT of force.

    • Slide and pull up bottom. (Make sure the antenna connectors get through.)

    翻译

  6. Twist and pull out antenna connector feeds.

    • Twist and pull out antenna connector feeds.

    翻译

  7. Pull up RF shield from motherboard. Unscrew the motherboard from the bottom. Push the motherboard forward (as in this picture) to unlatch it from the bottom.

    • Pull up RF shield from motherboard.

    • Unscrew the motherboard from the bottom.

    • Push the motherboard forward (as in this picture) to unlatch it from the bottom.

    翻译

  8. Some people have a card where you have to unscrew it. If that is your case, do that. The instructions below is for my type of router. Push the card forward to deattach the pins.

    • Some people have a card where you have to unscrew it. If that is your case, do that. The instructions below is for my type of router.

    • Push the card forward to deattach the pins.

    • Remove the card from the metal holdster.

    翻译

  9. Here are the markings on the motherboard chips. If you have any info on these chips, please comment!

    • Here are the markings on the motherboard chips. If you have any info on these chips, please comment!

    • Macronix 29F040QC-90

    • ISSI IS41C16100S-50K

    • SAMSUNG ARM S3C4510X01-QERO

    • RMC RTL8019AS

    • Bothhands FB2022

    • Bothhands 40ST1041E

    • Kendin KS8995. Kendin has since been bought by Micrel.

    翻译

  10. Enjoy!

    • Enjoy!

    翻译

作者

与5其他贡献者

William

于2010年04月18日注册

65 信誉积分

撰写一个指南

徽章: 1

2条评论

添加一条评论

what is that card inside this router

hartiTube - 回复

Thank you. I accomplished this task. Except my antenna wires were soldered to the board.

Darren - 回复

浏览统计数据:

过去的24小时： 0

过去的7天： 1

过去的30天： 13

总计 8,496