跳转到主内容

你所需要的

视频概述

这个拆解是不是维修指南。 要维修你的的Lenovo ThinkPad 410,请使用我们的维修手册

    • Unlatch and remove battery

    • Open Acess panel

    • Remove Hard drive

    • Remove wirless WAN

    • Remove DIMM from back

    • Remove Keyboard retaing Screw from bottom of system

    • Turn the system over and open the cover. Push the keyboard toward the back and lift it up. Slide it forward to rest it on the palm rest. Disconnect the ribbon cable.

    • Remove BIOS battery

    • Disconnect the two antenna leads from the Wireless WAN card. Remove the two retaining screws. Rotate the card up and pull it out of the slot.

    • Remeber which lead goes where Prior to removing it . Grey is usually MAIN , black AUX

    • Remove 14 retaining screws from back

    • The first 9 are required for bezel and touchpad removal .

    • M2 × 14 mm, wafer-head, nylon-coated (6)

    • M2 × 3 mm, wafer-head, nylon-coated (3)

    • The remaining need to be removed for base cover removal

    • M2 × 5 mm, wafer-head, nylon-coated (4)

    • M2 × 10 mm, wafer-head, nylon-coated (1)

    • Note: The FPC cable is attached on the underside of the keyboard bezel assembly. In some models, the Bluetooth daughter card is also attached on the underside of the keyboard bezel assembly.

    • Turn system over , open , remove 4 retaining screws and the work form one side , using spudger to remove chasis bezel

    • M2 × 3 mm, wafer-head, nylon-coated (4)

    • Remove 4 retaining screws

    • M2 × 3 mm, wafer-head, nylon-coated (4)

    • Remove the two retaining screws on the bottom of the system.

    • M2.5 × 6 mm, wafer-head, nylon-coated (2)

    • Turn the system over and open the cover.

    • Unroute all the wires.

    • Remove the retaining screws.

    • M2.5 × 6 mm, wafer-head, nylon-coated (2)

    • Carefully lift the LCD panel up and out of the chass

kevinleroy

于08/13/12注册

338 声望

撰写一个指南

团队

Master Techs Master Techs 的会员

Community

322 名成员

创作了2,506篇指南

5条评论

Uhm, sorry, what about the photos? I don't see any...

JoeMuc2014 - 回复

Still not seeing any photos accompanying the steps listed in the teardown.

Jason Landers - 回复

well. if get short out inside of USB or network line>> that has been stopping the software lunched.

mohammed - 回复

we need teardown of T410

mohammed - 回复

The video shows a teardown of the T410s. It is a lot different from the T410.

Robert Oschmann - 回复

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 8

过去 30 天: 36

总计 10,427