修复你的物品 社区 商店

Kyocera Rise Teardown

撰写者： alcs99 (和另外一个贡献者)
发布于： October 21, 2013
  • 评论： 2
  • 收藏 15
  • 浏览量 5.9千

Kyocera Rise Teardown

撰写者： alcs99 (和另外一个贡献者)
发布于： October 21, 2013
  • 评论： 2
  • 收藏 15
  • 浏览量 5.9千

拆解

你所需要的

这个拆解是不是维修指南。 要维修你的的Kyocera Rise，请使用我们的维修手册。

  1. Kyocera Rise Teardown, Kyocera Rise Teardown: 步骤 1 中的图像 1，2 Kyocera Rise Teardown, Kyocera Rise Teardown: 步骤 1 中的图像 2，2

    • Teardown of Kyocera Rise

    编辑

  2. Kyocera Rise Teardown, Removing the Battery: 步骤 2 中的图像 1，2 Kyocera Rise Teardown, Removing the Battery: 步骤 2 中的图像 2，2

    • First remove the back cover to expose the battery

    • Next pull the battery from the phone

    编辑

  3. Kyocera Rise Teardown, Removing White Sticker: 步骤 3 中的图像 1，2 Kyocera Rise Teardown, Removing White Sticker: 步骤 3 中的图像 2，2

    • Remove the white sticker to expose the black plastic tab that is covering the ZIF connector that is connecting the flex cable that goes between the motherboard and screen

    编辑

  4. Kyocera Rise Teardown, Peeling Away Black Tab: 步骤 4 中的图像 1，3 Kyocera Rise Teardown, Peeling Away Black Tab: 步骤 4 中的图像 2，3 Kyocera Rise Teardown, Peeling Away Black Tab: 步骤 4 中的图像 3，3

    • Remove the black tab by first getting under it with something sharp like an exact knife

    • It's adhered with a weak adhesive and peels away easily

    • As you can see a hole was left open to specifically allow quick and easy mate/unmate of the ZIF connector

    编辑

  5. Kyocera Rise Teardown, Removing Screws: 步骤 5 中的图像 1，2 Kyocera Rise Teardown, Removing Screws: 步骤 5 中的图像 2，2

    • Remove all six screws using a Phillips # 0 (PH0) screwdriver

    编辑

  7. Kyocera Rise Teardown, Disconnecting ZIF: 步骤 6 中的图像 1，3 Kyocera Rise Teardown, Disconnecting ZIF: 步骤 6 中的图像 2，3 Kyocera Rise Teardown, Disconnecting ZIF: 步骤 6 中的图像 3，3

    • Unplug the ZIF (zero insertion force connector) by running a pair of blunt Tweezers underneath it. Twist and pull, this causes the black latch that's holding down the flex cable to open and then the flex cable can be pulled out of the ZIF with the Tweezers.

    • Since the screws were removed the phone's keyboard containing half can be lifted away from the screen.

    编辑

  8. Kyocera Rise Teardown, Peeling Away The Keyboard: 步骤 7 中的图像 1，3 Kyocera Rise Teardown, Peeling Away The Keyboard: 步骤 7 中的图像 2，3 Kyocera Rise Teardown, Peeling Away The Keyboard: 步骤 7 中的图像 3，3

    • Turn the phone so that the keyboard is facing you

    • The keyboard is flexible and can be peeled away from the body of the phone

    • The keyboard is latched in about 6 places and can peeled away slowly and carefully. It is not held down with adhesive.

    编辑

  9. Kyocera Rise Teardown, Removing the Motherboard: 步骤 8 中的图像 1，3 Kyocera Rise Teardown, Removing the Motherboard: 步骤 8 中的图像 2，3 Kyocera Rise Teardown, Removing the Motherboard: 步骤 8 中的图像 3，3

    • Remove the 3 screws again using the Philips #0 screwdriver. This will allow you to pull out the motherboard from the back housing

    编辑

  10. Kyocera Rise Teardown, Motherboard and Chips: 步骤 9 中的图像 1，3 Kyocera Rise Teardown, Motherboard and Chips: 步骤 9 中的图像 2，3 Kyocera Rise Teardown, Motherboard and Chips: 步骤 9 中的图像 3，3

    • The metal shielding was difficult to unscrew and the screws were all stripped in the process. Using a needle nose plier, the metal shielding was torn away

    • The exposed motherboard is shown here along with microscope pictures of the chips.

    • Chip #1

    • Chip #2: 1 GHz Qualcomm processor PM8058

    编辑

  11. Kyocera Rise Teardown, Motherboard and Chips: 步骤 10 中的图像 1，3 Kyocera Rise Teardown, Motherboard and Chips: 步骤 10 中的图像 2，3 Kyocera Rise Teardown, Motherboard and Chips: 步骤 10 中的图像 3，3

    • Chip #3: Qualcomm CDMA antenna driver QTR8615

    • Chip #4: Samsung 2 GBit memory

    • Chips #5

    编辑

  12. Kyocera Rise Teardown, Removing Antenna Assembly: 步骤 11 中的图像 1，3 Kyocera Rise Teardown, Removing Antenna Assembly: 步骤 11 中的图像 2，3 Kyocera Rise Teardown, Removing Antenna Assembly: 步骤 11 中的图像 3，3

    • After removing the motherboard the back housing can then be disassembled. The volume rocker and the power button slide out of the back housing without any effort

    • The upper antenna assembly is held in place only through a "snap into place" mechanism. It can be removed by apply a little prying pressure with end of a tweezer at the locations indicated with arrows

    编辑

  13. Kyocera Rise Teardown, Lower Antenna Assembly: 步骤 12 中的图像 1，1

    • The lower antenna assembly can be similarly removed by applying a little pressure to pop it out of the assembly

    编辑

  14. Kyocera Rise Teardown, Antennas and Housing: 步骤 13 中的图像 1，2 Kyocera Rise Teardown, Antennas and Housing: 步骤 13 中的图像 2，2

    • Both sides of the back assembly and antenna assemblies are shown here

    编辑

作者

与1其他贡献者

alcs99

于09/10/13注册

5,075 声望

创作了6篇指南

徽章: 21

+ 18更多徽章

2条评论

You didnt describe how to disassemble the front panel with the touchscreen.

Mark Laxmeter - 回复

It would be useful to consider adding in the size of the screws removed, in case of misplacement. Also, since those screws tend to fall out over the course of normal phone usage

Thomas Leman - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 5,923