修复你的物品 社区 商店

Fitbit Charge HR Teardown

撰写者： Bradley Nelson (和另外一个贡献者)
发布于： March 22, 2016
  • 评论： 8
  • 收藏 5
  • 浏览量 23.9千

Fitbit Charge HR Teardown

撰写者： Bradley Nelson (和另外一个贡献者)
发布于： March 22, 2016
  • 评论： 8
  • 收藏 5
  • 浏览量 23.9千

拆解

简介

Showing how A Fitbit Charge HR is taken apart

你所需要的

这个拆解是不是维修指南。 要维修你的的Fitbit Charge HR，请使用我们的维修手册。

  1. Fitbit Charge HR Teardown, Remove Screws: 步骤 1 中的图像 1，1

    • Take the 4 Screws out of the Sides you will need a T3 star Screw Driver

    编辑

  3. Fitbit Charge HR Teardown: 步骤 2 中的图像 1，2 Fitbit Charge HR Teardown: 步骤 2 中的图像 2，2

    • You Pry out the Main board you can see the Metal Hooks

    编辑

  4. Fitbit Charge HR Teardown: 步骤 3 中的图像 1，1

    • You can Then pull out the Screws from around the Screen

    编辑

作者

与1其他贡献者

Bradley Nelson

于03/08/16注册

56 声望

撰写一个指南

徽章: 0

8条评论

Can the battery be replaced?

Rick - 回复

Mine was just over a year old (barely out of warranty) when it died. The Fitbit folks were kind enough to replace it anyway once I expressed my displeasure. I'd haggle with them a bit before going the DIY route but I'm definitely keeping my old one for spare parts. Hopefully someone will point out an aftermarket battery source before I need to do that.

fragmasterflash - 回复

The screws in mine were Torx T-2, not T-3.

Jake McIvor - 回复

The button is stuck in my ChargeHR. I bought the T3 screwdriver and it is too big. Either the screws are T2 or my screwdriver is too much imprecise.

Anyone fixed a stuck button?

Anderson Maciel - 回复

it definitely not T3 must be T2

Marc Frederick - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 16

总计 23,963