跳转到主内容

在此拆机指南中使用的工具

这个拆解是不是维修指南。 要维修你的的Dualshock 2,请使用我们的维修手册

  1. On the back of the controller there is screw holes
    • On the back of the controller there is screw holes

    • Using a Philip Screw driver remove the screws

  2. Using a pry tool separate the two controller pieces Using a pry tool separate the two controller pieces Using a pry tool separate the two controller pieces
    • Using a pry tool separate the two controller pieces

  3. First remove the buttons Most of my buttons fell off. Then left up on the sensor and set it aside. Most of my buttons fell off. Then left up on the sensor and set it aside.
    • First remove the buttons

    • Most of my buttons fell off. Then left up on the sensor and set it aside.

  4. When I lifted the controller out of the chassis one of the dual shock motors fell off it soldering. I removed the other one. When I lifted the controller out of the chassis one of the dual shock motors fell off it soldering. I removed the other one.
    • When I lifted the controller out of the chassis one of the dual shock motors fell off it soldering. I removed the other one.

  5. What you are left with
    • What you are left with

zachary

于2015年01月10日注册

775 信誉积分

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 12

过去的30天: 53

总计 6,374