跳转到主内容

在此拆机指南中使用的工具

简介

A look at the guts of the iPaq.

这个拆解是不是维修指南。 要维修你的的Compaq iPaq Pocket PC 3765,请使用我们的维修手册

  1. an original ipaq from compaq not hp
    • an original ipaq from compaq not hp

    • the teardown is realatively simple (PS: simply is not always easy)

  2. There are four torx screws here There are four torx screws here There are four torx screws here
    • There are four torx screws here

  3. Gently pry around the edges to release the cover The battery is glued to the back cover be careful not to damage the fragile ribbon cable fold the back under the front panel and carefully remove the battery connector
    • Gently pry around the edges to release the cover

    • The battery is glued to the back cover be careful not to damage the fragile ribbon cable

    • fold the back under the front panel and carefully remove the battery connector

  4. x x
    • x

  5. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  6. Disconnect the backlight from the inverter
    • Disconnect the backlight

    • from the inverter

    • here is an Htc branded processor

    • be sure to pop up the black wire

    • remove the stylus ejector

  7. Gently pull on the top face while lifting the logic board  (will require some force)
    • Gently pull on the top face while lifting the logic board (will require some force)

    • Be careful of the black wire running along the board

    • Disconnect the screen and digitizer cables being careful not to damage the cable or connector

  8. two Intel flash chips
    • two Intel flash chips

  9. again putting pressure on the top panel lift the display out of the case again putting pressure on the top panel lift the display out of the case again putting pressure on the top panel lift the display out of the case
    • again putting pressure on the top panel lift the display out of the case

  10. an htc branded control board
    • an htc branded control board

    • (funny I thought it said compaq on the front?)

  11. The final product (destroyed that is) I used NO anti-static precautions, reassembled the device and after finaly getting the video cable to lock in it worked fine
    • The final product (destroyed that is)

    • I used NO anti-static precautions, reassembled the device and after finaly getting the video cable to lock in it worked fine

    • PS: the touch panel worked But when i fixed the video cable i knocked it loose and didnt realize it and now i have to fix it (sigh)

josh9623

于2010年08月27日注册

149 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 7

总计 2,850