CANDY CON Wireless Controller Teardown

撰写者： Roger (和另外一个贡献者)

发布于： April 24, 2024

评论： 0
收藏 0
浏览量 232

CANDY CON Wireless Controller Teardown

撰写者： Roger (和另外一个贡献者)

发布于： April 24, 2024

评论： 0
收藏 0
浏览量 232

拆解

简介

This is a full teardown of Gamestop's new CANDY CON wireless controller for the Nintendo Switch and PC. This controller operates as a bluetooth switch pro controller on the NS setting and a PC dongle wireless controller using the PC mode.

Key features include:

Customizable face plates

Customizable D-pad

Customizable Joysticks

Bluetooth 5.2

USB Dongle

USB C Charging

Analog triggers

Hall effect joysticks

Rechargeable 600mAh battery

2 Rear Programmable buttons

Macros and Turbo Mode

你所需要的

这个拆解是不是维修指南。要维修你的的CANDY CON Wireless Controller，请使用我们的维修手册。

步骤 1 Remove the faceplate

CANDY CON Wireless Controller Teardown, Remove the faceplate: 步骤 1 中的图像 1，2

CANDY CON Wireless Controller Teardown, Remove the faceplate: 步骤 1 中的图像 2，2

Locate the indentation on the bottom of the controller
Pull the faceplate off using a fingernail or spudger

编辑

步骤 2 Remove Joysticks and D-pad

CANDY CON Wireless Controller Teardown, Remove Joysticks and D-pad: 步骤 2 中的图像 1，2

CANDY CON Wireless Controller Teardown, Remove Joysticks and D-pad: 步骤 2 中的图像 2，2

Remove both joysticks and the D-pad by carefully pulling up

编辑

步骤 3 Begin opening the base controller

CANDY CON Wireless Controller Teardown, Begin opening the base controller: 步骤 3 中的图像 1，3

CANDY CON Wireless Controller Teardown, Begin opening the base controller: 步骤 3 中的图像 2，3

CANDY CON Wireless Controller Teardown, Begin opening the base controller: 步骤 3 中的图像 3，3

Remove 8 Phillips screws with a Philips #1 screwdriver
Pry open the two main pieces by pulling up on the edges of the controller

编辑

步骤 4 Finish opening the base controller

CANDY CON Wireless Controller Teardown, Finish opening the base controller: 步骤 4 中的图像 1，2

CANDY CON Wireless Controller Teardown, Finish opening the base controller: 步骤 4 中的图像 2，2

Separate the controller by flipping it on its face and then prying up near the bottom buttons

编辑

步骤 5 Unplug the battery

CANDY CON Wireless Controller Teardown, Unplug the battery: 步骤 5 中的图像 1，1

Unplug the battery using a spudger tool

编辑

步骤 6 Unscrew the mainboard

CANDY CON Wireless Controller Teardown, Unscrew the mainboard: 步骤 6 中的图像 1，1

Unscrew the 2 Phillips #1 screws securing the mainboard to the controller housing

编辑

步骤 7 Remove the mainboard and haptic motors

CANDY CON Wireless Controller Teardown, Remove the mainboard and haptic motors: 步骤 7 中的图像 1，3

CANDY CON Wireless Controller Teardown, Remove the mainboard and haptic motors: 步骤 7 中的图像 2，3

CANDY CON Wireless Controller Teardown, Remove the mainboard and haptic motors: 步骤 7 中的图像 3，3

Carefully remove the mainboard and attached haptic motors by pulling it up from the bottom and then top
Be careful removing the haptic motors to ensure the wires do not break

编辑

步骤 8 Teardown Complete!

CANDY CON Wireless Controller Teardown, Teardown Complete!: 步骤 8 中的图像 1，2

CANDY CON Wireless Controller Teardown, Teardown Complete!: 步骤 8 中的图像 2，2

All buttons are keyed so they can only go in the exact spot they belong

编辑

步骤 9 Reassembly tips

CANDY CON Wireless Controller Teardown, Reassembly tips: 步骤 9 中的图像 1，3

CANDY CON Wireless Controller Teardown, Reassembly tips: 步骤 9 中的图像 2，3

CANDY CON Wireless Controller Teardown, Reassembly tips: 步骤 9 中的图像 3，3

Follow the teardown guide in reverse to reassemble the controller
When reassembling the controller align the bottom buttons first and then work on the charging port side
Test all the buttons before or right after screwing in the mainboard
The D-pad has an arrow on the top that should point up (towards the arrow on the base controller)